ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
62 × 34.5 mm

Sealed deep groove ball bearings

ECB 504

A one-piece plastic end cap for size 04 ball bearing units. 62 mm across, 34.5 mm deep, and it presses in by hand to cover the shaft end.

Outside D
62 mm
Width B
34.5 mm
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

ECB 504 is a plastic end cap for size 04 ball bearing units. It fits into the open side of the housing and covers the end of the shaft. That keeps fingers, gloves and loose clothing away from the turning shaft, and it stops dust, dirt and water from getting into the bearing.

Design and construction

The cover is made in one piece from TPU (thermoplastic polyurethane), a tough plastic that stays slightly flexible. Because it bends a little, you can press it into place by hand. No screws or tools are needed. It holds up well against grease, oil and most cleaning products, and it works at temperatures up to 100 °C.

Size at a glance: 62 mm across, 34.5 mm deep, 18 g. The depth leaves room for a short shaft end and the locking collar behind the cover.

Fitting and removal

  1. Wipe the housing opening clean.
  2. Line the cover up with the opening.
  3. Press it in evenly by hand until it sits flat.

To grease or inspect the bearing, pull the cover straight out and press it back in afterwards.

Typical applications

  • Conveyors and bucket elevators
  • Farm machines and grain handling equipment
  • Food and packaging lines that are washed down often
  • Fans and air-handling units

Key features

  • Covers the shaft end completely
  • Presses in by hand, no tools needed
  • Holds up to grease, oil and cleaning products
  • Works up to 100 °C

Typical applications

  • Conveyors and bucket elevators
  • Farm machines
  • Food and packaging lines
  • Fans and air handling

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for ECB 504
Outside diameter (D) 62 mm
Width (B) 34.5 mm
Mass 0.018 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for ECB 504
Operating temperature range Up to +100 °C

Design and execution

Design & execution for ECB 504
Ring & ball material Thermoplastic polyurethane (TPU)

Identification

Identification for ECB 504
Part number ECB 504
Manufacturer part number ECB 504

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for ECB 504
Manufacturer Their designation Our equivalent
SKF ECB 504 ECB 504

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Need a price for ECB 504?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
ECB 504 Price on application
Get a quote

Quote for ECB 504

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Speed, load, temperature, mounting arrangement and the designation you are replacing all help us answer in one pass.

We use your details only to answer this enquiry. See our privacy policy.