ECY 212
A large polypropylene end cap for 212-size ball bearing units. 116 mm open end, 42 mm deep.
- Outside D
- 116 mm
- Width B
- 42 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECY 212 caps the shaft end on 212-size ball bearing units. It fits into the open side of the housing, keeps the turning shaft out of reach and helps stop dust and water from getting at the bearing.
Large cover, simple fit
This cover measures 116 mm across the open end, 106.4 mm across the closed end and 42 mm deep. Even at this size it still fits by hand, with no screws or tools.
Material and dimensions
It is a polypropylene (PP) moulding of about 50 g. PP is light for its size, resists most chemicals and is rated for use up to 100 °C.
- Outside diameter at open end (D1): 116 mm
- Outside diameter at closed end (D): 106.4 mm
- Anchorage diameter (D2): 118 mm
- Overall width (A): 42 mm
- Weight: approx. 50 g
- Material: Polypropylene (PP)
Fitting and removal
- Wipe the housing opening clean.
- Start one side of the cover in the bore.
- Work round with firm hand pressure until it sits flush.
Pull it straight out to service the bearing, then press it back in.
Before you order
Make sure the housing opening is 116 mm and that the shaft end and collar fit within the 42 mm depth.
Where it is used
- Heavy belt conveyors
- Aggregate handling
- Large agricultural machines
- Process fans and blowers
Key features
- 42 mm depth
- Fits 212-size units
- PP, about 50 g
- Push-in, no tools
- Rated up to 100 °C
Typical applications
- Heavy belt conveyors
- Aggregate handling
- Large agricultural machines
- Process fans and blowers
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 116 mm |
|---|---|
| Width (B) | 42 mm |
| Mass | 0.05 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECY 212 |
|---|---|
| Manufacturer part number | ECY 212 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECY 212 |
ECY 212 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does ECY 212 fit?
212-size ball bearing units with a 116 mm housing opening.
How deep is it?
42 mm overall.
Can it be removed for greasing?
Yes. Pull it out, service the bearing and press it back in.
What is it made of?
Polypropylene (PP), rated up to 100 °C.
Need a price for ECY 212?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
