ECL 206
A one-piece PP end cap for 206-size ball bearing units. 64 mm open end, 30 mm deep, fitted by hand.
- Outside D
- 64 mm
- Width B
- 30 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECL 206 closes off the shaft end on 206-size ball bearing units. Fitted into the housing, it covers the rotating shaft tip, lowers the risk of snagging and gives the bearing an extra barrier against dust and splashes.
What it is made of
The cover is a one-piece polypropylene (PP) moulding weighing about 14 g. PP stays rigid, takes up very little moisture and handles most industrial chemicals. It can be used at temperatures up to 100 °C.
Dimensions
It is 30 mm deep, 64 mm across the open end and 53.8 mm across the closed end. The anchorage diameter is 65 mm.
- Outside diameter at open end (D1): 64 mm
- Outside diameter at closed end (D): 53.8 mm
- Anchorage diameter (D2): 65 mm
- Overall width (A): 30 mm
- Weight: approx. 14 g
- Material: Polypropylene (PP)
Fitting and removal
- Clear any grease or grit from the housing opening.
- Seat the cover squarely in the bore.
- Press around the edge by hand until it locks in.
When the bearing needs a check, pull the cover free and push it back once you are done.
Before you order
Your housing opening should match the 64 mm open-end size, and the shaft end needs to fit within 30 mm.
Where it is used
- Food and beverage conveyors
- Woodworking machines
- Garden and farm machinery
- Exhaust and supply fans
Key features
- One-piece PP, about 14 g
- Fits 206-size units
- Push-in, no tools
- Chemical resistant
- Rated up to 100 °C
Typical applications
- Food and beverage conveyors
- Woodworking machines
- Garden and farm machinery
- Exhaust and supply fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 64 mm |
|---|---|
| Width (B) | 30 mm |
| Mass | 0.014 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECL 206 |
|---|---|
| Manufacturer part number | ECL 206 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECL 206 |
ECL 206 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does ECL 206 fit?
206-size ball bearing units with a 64 mm housing opening.
How deep is it?
30 mm overall.
Does it need screws?
No. It presses in by hand.
What is the temperature limit?
100 °C.
Need a price for ECL 206?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
