ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
25.4 × 40.3 mm

Flanged ball bearing units

F2B 100-LF

1 in oval flange unit with concentric locking for an even grip around the shaft.

Bore d
25.4 mm
Width B
40.3 mm
Dynamic C
14 kN
Static C₀
7.8 kN
Limiting speed
7,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 100-LF is a two-bolt oval flange unit for 1 in (25.4 mm) shafts that uses concentric locking. The sealed YSP 205-100 SB-2F insert sits in a cast iron housing with flingers on both sides.

Even grip, no set screw marks

Concentric locking clamps the shaft evenly all the way around, instead of pressing at one or two points like set screws. It is tightened with a single M5 screw.

Specifications

  • Shaft diameter (d): 1 in (25.4 mm)
  • Bolt hole centres (J): 98.8 mm
  • Overall height (H): 123.8 mm
  • Overall length (L): 69.9 mm
  • Housing width (A): 29.6 mm
  • Overall width (T): 40.3 mm
  • Inner ring width (B1): 33.2 mm
  • Bolt holes (N): 12.7 mm, for 7/16 in bolts
  • Basic dynamic load rating (C): 14 kN
  • Basic static load rating (C0): 7.8 kN
  • Fatigue load limit (Pu): 0.335 kN
  • Limiting speed: 7 000 r/min (h6 shaft)
  • Insert bearing: YSP 205-100 SB-2F (concentric locking)
  • Locking: Concentric locking, tightened with an M5 screw
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.578 kg

How to fit it

  1. Clean the shaft.
  2. Bolt the unit down with two 7/16 in bolts on 98.8 mm centres.
  3. Align the shaft.
  4. Tighten the M5 locking screw.

Where it is used

  • Fans and blowers
  • Conveyor drive shafts
  • Food and packaging machines
  • Shafts that must not be marked

Key features

  • Fits 1 in (25.4 mm) shafts
  • Concentric locking
  • Seals with flingers
  • 14 kN dynamic rating
  • Takes the ECY 205 end cover

Typical applications

  • Fans and blowers
  • Conveyor drive shafts
  • Food and packaging machines
  • Shafts that must not be marked

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 100-LF
Bore diameter (d) 25.4 mm
Width (B) 40.3 mm
Mass 0.578 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 100-LF
Basic dynamic load rating (C) 14 kN
Basic static load rating (C₀) 7.8 kN
Fatigue load limit (Pu) 0.335 kN
Limiting speed 7000 r/min

Design and execution

Design & execution for F2B 100-LF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 100-LF
Part number F2B 100-LF
Manufacturer part number F2B 100-LF
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 100-LF
Manufacturer Their designation Our equivalent
SKF F2B 100-LF F2B 100-LF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

How does F2B 100-LF lock to the shaft?

With concentric locking, tightened by an M5 screw.

What shaft does it fit?

A 1 in (25.4 mm) shaft.

What is the overall width?

40.3 mm.

What end cover fits?

The ECY 205 end cover.

Need a price for F2B 100-LF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 100-LF Price on application
Get a quote

Quote for F2B 100-LF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.