F2B 20M-FM
Two-bolt oval flange bearing for 20 mm metric shafts, with a narrow inner ring and eccentric collar locking.
- Bore d
- 20 mm
- Width B
- 42.6 mm
- Dynamic C
- 12.7 kN
- Static C₀
- 6.55 kN
- Limiting speed
- 8,500 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 20M-FM is a cast iron oval flange unit for 20 mm metric shafts. Its sealed insert has a narrow inner ring and locks with an eccentric collar, and the housing bolts down through two holes 89.7 mm apart.
How the collar locks
The eccentric collar slides over a matching step on the inner ring. Turning it in the direction of shaft rotation wedges it tight, and a set screw stops it from working loose. This makes it a good match for drives that run in one direction.
Specifications
- Shaft diameter (d): 20 mm
- Bolt hole centres (J): 89.7 mm
- Housing width (A): 29 mm
- Overall width (T): 42.6 mm
- Inner ring width (B1): 30.5 mm
- Attachment bolts: M10 bolts
- Basic dynamic load rating (C): 12.7 kN
- Basic static load rating (C0): 6.55 kN
- Limiting speed: 8 500 r/min (h6 shaft)
- Locking: Eccentric collar with set screw
- Sealing: Contact seal on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.436 kg
Mounting tips
- Slide the unit onto a clean 20 mm shaft.
- Bolt the flange down with two M10 bolts.
- Turn the collar in the running direction until it grips.
- Tighten the collar set screw.
Typical applications
- Belt and roller conveyors
- Farm machinery
- Metric industrial drives
- Material handling
Key features
- Fits 20 mm metric shafts
- Eccentric collar locking
- Sealed on both sides
- 89.7 mm bolt centres
- 12.7 kN dynamic rating
Typical applications
- Belt and roller conveyors
- Farm machinery
- Metric industrial drives
- Material handling
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 20 mm |
|---|---|
| Width (B) | 42.6 mm |
| Mass | 0.436 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 12.7 kN |
|---|---|
| Basic static load rating (C₀) | 6.55 kN |
| Limiting speed | 8500 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 20M-FM |
|---|---|
| Manufacturer part number | F2B 20M-FM |
| Conforms to standard | North American, metric bore |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 20M-FM |
F2B 20M-FM |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft does F2B 20M-FM fit?
A 20 mm shaft.
What is the bolt spacing?
89.7 mm.
What is the limiting speed?
8 500 r/min.
How much does it weigh?
About 0.44 kg.
Need a price for F2B 20M-FM?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
