F2B 30M-WF
30 mm oval flange unit with a wide 48.4 mm inner ring, eccentric collar locking and flinger seals.
- Bore d
- 30 mm
- Width B
- 51.1 mm
- Dynamic C
- 19.5 kN
- Static C₀
- 11.2 kN
- Limiting speed
- 6,300 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 30M-WF is a two-bolt oval flange unit for 30 mm shafts. It pairs a wide inner ring with an eccentric locking collar, inside a strong cast iron housing.
Why a wide inner ring helps
The inner ring is 48.4 mm wide, about 10 mm wider than on the F2B 30M-TF. This gives the bearing a longer grip on the shaft. The eccentric collar locks it when you turn it in the direction of rotation.
Specifications
- Shaft diameter (d): 30 mm
- Bolt hole centres (J): 116.7 mm
- Housing width (A): 34.9 mm
- Overall width (T): 51.1 mm
- Inner ring width (B1): 48.4 mm
- Attachment bolts: M10 bolts
- Basic dynamic load rating (C): 19.5 kN
- Basic static load rating (C0): 11.2 kN
- Limiting speed: 6 300 r/min (h6 shaft)
- Locking: Eccentric collar with set screw
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.948 kg
How to fit it
- Mount the unit and bolt it down with two M10 bolts.
- Slide the collar onto the inner ring.
- Turn it the same way the shaft runs until it locks.
- Tighten the collar set screw.
Where it is used
- Heavier conveyor drives
- Farm machinery
- Shafts that turn one way
- Bulk handling equipment
Key features
- Fits 30 mm shafts
- Wide 48.4 mm inner ring
- Eccentric collar locking
- Flinger and seal on both sides
- About 0.95 kg
Typical applications
- Heavier conveyor drives
- Farm machinery
- Shafts that turn one way
- Bulk handling equipment
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 30 mm |
|---|---|
| Width (B) | 51.1 mm |
| Mass | 0.948 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 19.5 kN |
|---|---|
| Basic static load rating (C₀) | 11.2 kN |
| Limiting speed | 6300 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 30M-WF |
|---|---|
| Manufacturer part number | F2B 30M-WF |
| Conforms to standard | North American, metric bore |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 30M-WF |
F2B 30M-WF |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft does F2B 30M-WF fit?
A 30 mm shaft.
How wide is the unit overall?
51.1 mm.
How is it locked?
With an eccentric collar turned in the running direction.
What is the dynamic load rating?
19.5 kN.
Need a price for F2B 30M-WF?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
