F2B 25M-TF
25 mm oval flange bearing unit with set screw locking, an extended inner ring and flinger seals.
- Bore d
- 25 mm
- Width B
- 38.9 mm
- Dynamic C
- 14 kN
- Static C₀
- 7.8 kN
- Limiting speed
- 7,000 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 25M-TF is a two-bolt oval flange unit for 25 mm shafts. The cast iron housing holds a sealed YAR 205-2F insert with an extended inner ring and set screw locking.
Everyday workhorse for 25 mm shafts
The 34.1 mm inner ring is fixed with M6x0.75 set screws, which works for constant or reversing rotation. Flingers in front of the seals help in dusty or dirty surroundings.
Specifications
- Shaft diameter (d): 25 mm
- Bolt hole centres (J): 98.8 mm
- Overall height (H): 123.8 mm
- Overall length (L): 69.9 mm
- Housing width (A): 29.6 mm
- Overall width (T): 38.9 mm
- Inner ring width (B1): 34.1 mm
- Bolt holes (N): 12.7 mm, for M10 bolts
- Basic dynamic load rating (C): 14 kN
- Basic static load rating (C0): 7.8 kN
- Fatigue load limit (Pu): 0.335 kN
- Limiting speed: 7 000 r/min (h6 shaft)
- Insert bearing: YAR 205-2F (extended inner ring, set screw locking)
- Locking: Set screws (M6x0.75)
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.574 kg
Mounting tips
- Clean the shaft and remove burrs.
- Bolt the unit down with two M10 bolts on 98.8 mm centres.
- Align the shaft and tighten the set screws.
- Grease through the fitting at regular intervals.
Add an ECY 205 end cover if the shaft end needs to be closed off.
Typical applications
- General conveyors
- Reversing drives
- Agricultural equipment
- Bulk material handling
Key features
- Fits 25 mm metric shafts
- Extended 34.1 mm inner ring
- Set screw locking
- Seals with flingers
- Takes the ECY 205 end cover
Typical applications
- General conveyors
- Reversing drives
- Agricultural equipment
- Bulk material handling
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 25 mm |
|---|---|
| Width (B) | 38.9 mm |
| Mass | 0.574 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 14 kN |
|---|---|
| Basic static load rating (C₀) | 7.8 kN |
| Fatigue load limit (Pu) | 0.335 kN |
| Limiting speed | 7000 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 25M-TF |
|---|---|
| Manufacturer part number | F2B 25M-TF |
| Conforms to standard | North American, metric bore |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 25M-TF |
F2B 25M-TF |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft size does F2B 25M-TF fit?
A 25 mm shaft.
Can it run in both directions?
Yes. Set screw locking suits constant or alternating rotation.
What is the fatigue load limit?
0.335 kN.
What end cover fits?
The ECY 205 end cover.
Need a price for F2B 25M-TF?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
