Sealed deep groove ball bearings
ECB 504/D
A short-body end cover for size 04 ball bearing units. 62 mm across the rim, 29 mm deep, and it presses into the housing by hand.
- Outside D
- 62 mm
- Width B
- 29 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECB 504/D is a compact end cover made for size 04 ball bearing units. It plugs the open side of the housing and hides the turning shaft end. That keeps hands and loose material clear of the shaft and gives the bearing seal some extra cover from dust and wash water.
Why pick the short version
At 29 mm overall, the ECB 504/D sits much closer to the housing than our standard ECB 504, which is 34.5 mm deep. Choose it when a guard plate, frame member or pulley leaves only a small gap in front of the unit. The body narrows from 62 mm at the rim to 44.7 mm at the closed face, so it does not crowd the parts around it.
Material and dimensions
It is a single TPU moulding. The material has enough give to snap into the housing, yet it keeps its shape in service and is not bothered by grease, oil or most wash-down chemicals. Working temperature is up to 100 °C.
- Outside diameter at open end (D1): 62 mm
- Outside diameter at closed end (D): 44.7 mm
- Anchorage diameter (D2): 57.4 mm
- Overall width (A): 29 mm
- Weight: approx. 20 g
- Material: TPU
Fitting and removal
- Wipe old grease and dirt out of the housing bore.
- Set the cover square against the opening.
- Press around the rim evenly until it seats fully.
To regrease or inspect the bearing, pull the cover straight back out. It can go back in afterwards as long as the rim is not torn or bent out of shape.
Before you order
Measure the housing opening, which should be 62 mm, and check how far the shaft end and locking collar stand out from the housing face. Everything has to fit inside the 29 mm depth. If it does not, go for the standard ECB 504. Send us your bearing unit designation and we will confirm the right cover.
Where it is used
- Roller and belt conveyors
- Farm and harvesting equipment
- Packaging machines
- Ventilation fans and blowers
- Machines with tight clearance beside the bearing unit
Key features
- Only 29 mm deep for tight installations
- Push-in fit, no screws or tools
- TPU body resists grease, oil and cleaning agents
- Suitable for use up to 100 °C
- Can be taken out for regreasing and refitted
Typical applications
- Roller and belt conveyors
- Farm and harvesting equipment
- Packaging machines
- Ventilation fans and blowers
- Machines with tight clearance beside the bearing unit
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 62 mm |
|---|---|
| Width (B) | 29 mm |
| Mass | 0.02 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Thermoplastic polyurethane (TPU) |
|---|
Identification
| Part number | ECB 504/D |
|---|---|
| Manufacturer part number | ECB 504/D |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECB 504/D |
ECB 504/D |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
Which bearing units does the ECB 504/D suit?
It is made for size 04 ball bearing units with a 62 mm housing opening.
How deep is it compared with the ECB 504?
The ECB 504/D is 29 mm deep, while the standard ECB 504 is 34.5 mm. Pick the shorter one when space in front of the housing is limited.
Is it hard to fit?
No. Line it up with the opening and press it in by hand. No tools or fasteners are needed.
What is it made of?
One-piece thermoplastic polyurethane (TPU), which handles grease, oil and cleaning products and is rated up to 100 °C.
Can I take it off for maintenance?
Yes. Pull it straight out to reach the bearing, then press it back in when you are done.
Need a price for ECB 504/D?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
