ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
91.1 × 29 mm

Bearing end covers

ECB 507-35M/D

A short end cover for size 07 ball bearing units. 91.1 mm rim, only 29 mm deep, pressed in by hand with no tools.

Outside D
91.1 mm
Width B
29 mm
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

ECB 507-35M/D is a compact end cover for size 07 ball bearing units. It caps the open end of the housing so the shaft end is hidden, which removes a snag point and helps keep contamination away from the bearing.

A slim cover for a large housing

At 29 mm overall, this cover is 7.5 mm shallower than the standard ECB 507. It suits machines where the bearing unit sits close to a side plate or where the shaft has been cut short. It keeps the 91.1 mm rim and closes down to 73.5 mm at the face.

Material and dimensions

It is a single TPU moulding, firm enough to keep its shape and flexible enough to fit without tools. TPU is not bothered by grease, oil or common cleaning chemicals and is rated for use up to 100 °C.

  • Outside diameter at open end (D1): 91.1 mm
  • Outside diameter at closed end (D): 73.5 mm
  • Anchorage diameter (D2): 86.6 mm
  • Overall width (A): 29 mm
  • Weight: approx. 30 g
  • Material: TPU

Fitting and removal

  1. Clean grease and debris from the housing opening.
  2. Centre the cover on the bore.
  3. Push it in evenly round the edge until it is fully home.

Pull it straight out for regreasing or inspection, then refit it the same way.

Before you order

Check that the housing opening is 91.1 mm and that the shaft end and collar stay inside 29 mm. If you are unsure which size 07 cover matches your unit, send us the full unit designation.

Where it is used

  • Compact conveyors
  • Bottling and packaging machinery
  • Agricultural implements
  • Fans and air handling units
  • Size 07 units with short shaft ends

Key features

  • 29 mm deep, 7.5 mm shorter than the standard size 07 cover
  • No tools or fasteners
  • TPU resists oil, grease and cleaners
  • Rated to 100 °C
  • Removable and reusable

Typical applications

  • Compact conveyors
  • Bottling and packaging machinery
  • Agricultural implements
  • Fans and air handling units
  • Size 07 units with short shaft ends

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for ECB 507-35M/D
Outside diameter (D) 91.1 mm
Width (B) 29 mm
Mass 0.03 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for ECB 507-35M/D
Operating temperature range Up to +100 °C

Design and execution

Design & execution for ECB 507-35M/D
Ring & ball material Thermoplastic polyurethane (TPU)

Identification

Identification for ECB 507-35M/D
Part number ECB 507-35M/D
Manufacturer part number ECB 507-35M/D

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for ECB 507-35M/D
Manufacturer Their designation Our equivalent
SKF ECB 507-35M/D ECB 507-35M/D

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

Which units does the ECB 507-35M/D suit?

Size 07 ball bearing units with a 91.1 mm housing opening.

How much shorter is it than the ECB 507?

It is 29 mm deep, compared with 36.5 mm for the ECB 507.

Does it need tools to fit?

No. Hand pressure is enough.

What is the maximum temperature?

It is rated for use up to 100 °C.

Can I reuse it?

Yes. Pull it out for servicing and press it back in.

Need a price for ECB 507-35M/D?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
ECB 507-35M/D Price on application
Get a quote

Quote for ECB 507-35M/D

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.