ECB 508
A full-depth end cover for size 08 ball bearing units. 96.7 mm at the open end, 38 mm deep, one-piece TPU with a push-in fit.
- Outside D
- 96.7 mm
- Width B
- 38 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECB 508 is the standard end cover for size 08 ball bearing units. It closes the open side of the housing and covers the end of the shaft, keeping operators clear of the rotating parts and protecting the bearing from dirt and water.
Deep enough for size 08 shaft ends
The ECB 508 is 38 mm deep, leaving plenty of room for the shaft end and locking collar on size 08 units. It has a 96.7 mm rim and narrows to 70.8 mm at the closed end. For installations with less space, the 32.5 mm deep ECB 508-40M/D is available.
Material and dimensions
It is moulded as a single piece from TPU, a durable plastic with a little give that lets it snap into the housing by hand. It stands up to grease, oil and cleaning chemicals and can be used up to 100 °C.
- Outside diameter at open end (D1): 96.7 mm
- Outside diameter at closed end (D): 70.8 mm
- Anchorage diameter (D2): 92.4 mm
- Overall width (A): 38 mm
- Material: TPU
Fitting and removal
- Clean dirt and old grease from the housing opening.
- Line the cover up square with the bore.
- Push it in firmly round the rim until it is seated flush.
Pull the cover straight out to grease or inspect the bearing, then press it back in.
Before you order
The housing opening should be 96.7 mm, and the shaft end and collar should fit inside 38 mm. Not sure? Send us the bearing unit designation and we will confirm the fit.
Where it is used
- Heavy conveyors and bucket elevators
- Grain and feed handling equipment
- Crushers and process machines
- Large fans and blowers
- Material handling machinery
Key features
- 38 mm depth for size 08 shaft ends
- Presses in by hand
- TPU handles grease, oil and cleaners
- Rated up to 100 °C
- Removable and reusable
Typical applications
- Heavy conveyors and bucket elevators
- Grain and feed handling equipment
- Crushers and process machines
- Large fans and blowers
- Material handling machinery
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 96.7 mm |
|---|---|
| Width (B) | 38 mm |
| Mass | 0 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Thermoplastic polyurethane (TPU) |
|---|
Identification
| Part number | ECB 508 |
|---|---|
| Manufacturer part number | ECB 508 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECB 508 |
ECB 508 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
Which bearing units does the ECB 508 fit?
Size 08 ball bearing units with a 96.7 mm housing opening.
How deep is the cover?
It is 38 mm deep overall.
Is there a shorter option?
Yes. The ECB 508-40M/D is 32.5 mm deep.
Does it need tools?
No. It presses into the housing by hand.
What temperature can it take?
It is rated for use up to 100 °C.
Need a price for ECB 508?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
