ECW 205
A polypropylene end cover for 205-size ball bearing units. 53.9 mm open end, 29 mm deep, fitted by hand.
- Outside D
- 53.9 mm
- Width B
- 29 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECW 205 closes the open side of 205-size ball bearing units. It encloses the shaft tip, which makes the machine safer to work around and gives the bearing seal an extra shield against grit and water.
Room for a longer shaft end
At 29 mm deep, ECW 205 offers 6 mm more depth than the ECY 205. Pick it when the shaft or collar sits further out of the housing. The open end is 53.9 mm and the closed end is 46 mm.
Material and dimensions
The cover is a one-piece polypropylene (PP) moulding weighing around 12 g. It is stiff, light and unaffected by most chemicals, and it is rated for use up to 100 °C.
- Outside diameter at open end (D1): 53.9 mm
- Outside diameter at closed end (D): 46 mm
- Anchorage diameter (D2): 55.5 mm
- Overall width (A): 29 mm
- Weight: approx. 12 g
- Material: Polypropylene (PP)
Fitting and removal
- Wipe the bore clean.
- Hold the cover square to the opening.
- Push it home by hand until the rim is flush.
It can be removed with a straight pull and refitted after servicing.
Before you order
Your housing should have a 53.9 mm opening, and the shaft end must fit inside the 29 mm depth. Send us the unit number if you would like us to confirm.
Where it is used
- Roller conveyors
- Bottling and labelling lines
- Farm machinery
- Ventilation fans
Key features
- 29 mm depth
- Fits 205-size units
- One-piece PP, about 12 g
- Fits by hand
- Rated up to 100 °C
Typical applications
- Roller conveyors
- Bottling and labelling lines
- Farm machinery
- Ventilation fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 53.9 mm |
|---|---|
| Width (B) | 29 mm |
| Mass | 0.012 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECW 205 |
|---|---|
| Manufacturer part number | ECW 205 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECW 205 |
ECW 205 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What unit is ECW 205 for?
205-size ball bearing units with a 53.9 mm housing opening.
Should I pick ECW 205 or ECY 205?
ECW 205 is 29 mm deep and ECY 205 is 23 mm deep. Go for ECW if the shaft end stands out further.
Do I need tools?
No. It presses in by hand.
What temperature can it handle?
Up to 100 °C.
Need a price for ECW 205?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
