ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
96.7 × 32.7 mm

Bearing end covers

ECB 508/D

A push-in TPU end cap for size 08 ball bearing units. 96.7 mm at the open end, 32.7 mm deep, and fitted by hand.

Outside D
96.7 mm
Width B
32.7 mm
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

ECB 508/D is a moulded end cap for size 08 ball bearing units. It plugs the open side of the housing and hides the rotating shaft end. That keeps hands and loose clothing clear, and it cuts down on dust and water reaching the bearing.

Built for larger housings

With a 96.7 mm open end, this cover suits the bigger end of the ball bearing unit range, where shafts drive heavy rollers, augers or fan wheels. The body is 32.7 mm deep and narrows to 78.5 mm at the closed end, so it covers the shaft and collar without standing far out from the housing.

Material and dimensions

It is made in one piece from TPU (thermoplastic polyurethane). The material gives a little as you press it in, then grips the housing firmly. Grease, oil and most cleaning agents do not attack it, and it can run at temperatures up to 100 °C.

  • Outside diameter at open end (D1): 96.7 mm
  • Outside diameter at closed end (D): 78.5 mm
  • Anchorage diameter (D2): 92.2 mm
  • Overall width (A): 32.7 mm
  • Weight: approx. 40 g
  • Material: Thermoplastic polyurethane (TPU)

Fitting and removal

  1. Wipe the housing bore so the rim seats on clean metal.
  2. Start one side of the cover in the opening.
  3. Work your way round with firm hand pressure until it sits flush.

To get at the bearing, pull the cover straight out. It goes back in the same way.

Before you order

Make sure the housing opening matches the 96.7 mm open-end diameter and that the shaft end, with its locking collar, fits inside the 32.7 mm depth. If you are unsure, send us the unit designation and we will confirm the right cover.

Where it is used

  • Heavy belt conveyors
  • Grain augers and elevators
  • Mixers and agitators
  • Large fans and blowers

Key features

  • Covers the shaft end on size 08 units
  • Fits by hand, no tools
  • TPU resists grease, oil and cleaners
  • Rated up to 100 °C
  • Removable for greasing

Typical applications

  • Heavy belt conveyors
  • Grain augers and elevators
  • Mixers and agitators
  • Large fans and blowers

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for ECB 508/D
Outside diameter (D) 96.7 mm
Width (B) 32.7 mm
Mass 0.04 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for ECB 508/D
Operating temperature range Up to +100 °C

Design and execution

Design & execution for ECB 508/D
Ring & ball material Thermoplastic polyurethane (TPU)

Identification

Identification for ECB 508/D
Part number ECB 508/D
Manufacturer part number ECB 508/D

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for ECB 508/D
Manufacturer Their designation Our equivalent
SKF ECB 508/D ECB 508/D

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What size unit does the ECB 508/D fit?

It is made for size 08 ball bearing units with a 96.7 mm housing opening.

What is it made of?

One-piece TPU (thermoplastic polyurethane), which flexes slightly for a firm push-in fit.

How deep is the cover?

32.7 mm overall, narrowing to 78.5 mm at the closed end.

Can it be taken off for maintenance?

Yes. Pull it straight out, grease or check the bearing, then press it back in.

Need a price for ECB 508/D?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
ECB 508/D Price on application
Get a quote

Quote for ECB 508/D

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Speed, load, temperature, mounting arrangement and the designation you are replacing all help us answer in one pass.

We use your details only to answer this enquiry. See our privacy policy.