ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
96.7 × 32.5 mm

Bearing end covers

ECB 508-40M/D

A shorter end cover for size 08 ball bearing units. 96.7 mm rim, 32.5 mm overall width, TPU body that fits without tools.

Outside D
96.7 mm
Width B
32.5 mm
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

ECB 508-40M/D is a reduced-depth end cover for size 08 ball bearing units. It fits into the open side of the housing and caps the shaft end, removing an exposed rotating part and helping keep dust and moisture off the bearing.

Shorter than the standard size 08 cover

This cover is 32.5 mm deep, 5.5 mm less than the ECB 508. Use it on size 08 units that sit close to a guard, frame or drive component. It keeps the 96.7 mm rim and closes down to 78.5 mm at the face.

Material and dimensions

The body is a single TPU moulding. It is strong and slightly flexible, so it holds firmly in the housing once pressed in. Grease, oil and cleaning agents do not harm it, and it is rated to 100 °C.

  • Outside diameter at open end (D1): 96.7 mm
  • Outside diameter at closed end (D): 78.5 mm
  • Anchorage diameter (D2): 92.2 mm
  • Overall width (A): 32.5 mm
  • Weight: approx. 40 g
  • Material: TPU

Fitting and removal

  1. Clean the housing opening thoroughly.
  2. Hold the cover centred and square on the bore.
  3. Press evenly round the edge until the rim is seated.

For maintenance, pull the cover straight out. It can be refitted if the rim is undamaged.

Before you order

Check that the housing opening is 96.7 mm and that the shaft end and collar fit within 32.5 mm. If more room is needed, choose the ECB 508. Send us your unit number and we will check it.

Where it is used

  • Conveyors and transfer systems
  • Agricultural machinery
  • Packaging equipment
  • Fans and blowers
  • Size 08 units in tight spaces

Key features

  • 32.5 mm deep for tighter installations
  • Push-in fit, no tools
  • TPU resists grease, oil and cleaners
  • Rated up to 100 °C
  • Removable for servicing

Typical applications

  • Conveyors and transfer systems
  • Agricultural machinery
  • Packaging equipment
  • Fans and blowers
  • Size 08 units in tight spaces

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for ECB 508-40M/D
Outside diameter (D) 96.7 mm
Width (B) 32.5 mm
Mass 0.04 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for ECB 508-40M/D
Operating temperature range Up to +100 °C

Design and execution

Design & execution for ECB 508-40M/D
Ring & ball material Thermoplastic polyurethane (TPU)

Identification

Identification for ECB 508-40M/D
Part number ECB 508-40M/D
Manufacturer part number ECB 508-40M/D

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for ECB 508-40M/D
Manufacturer Their designation Our equivalent
SKF ECB 508-40M/D ECB 508-40M/D

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What does the ECB 508-40M/D fit?

Size 08 ball bearing units with a 96.7 mm housing opening.

How does it differ from the ECB 508?

It is 32.5 mm deep instead of 38 mm, for installations with less room.

How do I fit it?

Press it into the clean housing opening by hand until it is seated.

What is the material?

One-piece TPU, rated up to 100 °C.

Can it be reused?

Yes. It can be pulled out and pressed back in.

Need a price for ECB 508-40M/D?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
ECB 508-40M/D Price on application
Get a quote

Quote for ECB 508-40M/D

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.