ECW 208
A deep PP end cap for 208-size ball bearing units. 82.4 mm open end, 36 mm deep.
- Outside D
- 82.4 mm
- Width B
- 36 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECW 208 is a plastic end cap for 208-size ball bearing units. It covers the shaft end at the housing for safety and adds a barrier against dust, chips and water.
The deeper option for 208 units
ECW 208 is 36 mm deep, 7.5 mm more than the ECY 208. That makes it the better pick when the shaft extends past the collar. It measures 82.4 mm at the open end and 70.6 mm at the closed end.
Material and dimensions
It is moulded in polypropylene (PP) and weighs about 26 g. The material is light and firm, resists most chemicals and is rated to 100 °C.
- Outside diameter at open end (D1): 82.4 mm
- Outside diameter at closed end (D): 70.6 mm
- Anchorage diameter (D2): 84 mm
- Overall width (A): 36 mm
- Weight: approx. 26 g
- Material: Polypropylene (PP)
Fitting and removal
- Clean out the housing opening.
- Line the cover up with the bore.
- Push it in by hand until the rim sits tight.
Pull it straight out to grease or inspect the bearing.
Before you order
Make sure your housing has an 82.4 mm opening and that the shaft end fits inside 36 mm.
Where it is used
- Medium-duty conveyors
- Sawmill equipment
- Feed mills
- Industrial fans
Key features
- Deep 36 mm body
- Fits 208-size units
- PP, about 26 g
- Push-in, no tools
- Rated up to 100 °C
Typical applications
- Medium-duty conveyors
- Sawmill equipment
- Feed mills
- Industrial fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 82.4 mm |
|---|---|
| Width (B) | 36 mm |
| Mass | 0.026 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECW 208 |
|---|---|
| Manufacturer part number | ECW 208 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECW 208 |
ECW 208 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does ECW 208 fit?
208-size ball bearing units with an 82.4 mm housing opening.
Should I choose ECW 208 or ECY 208?
ECW 208 is 36 mm deep and ECY 208 is 28.5 mm deep. Choose ECW for longer shaft ends.
Is it easy to remove?
Yes. A straight pull takes it out.
What material is it?
Polypropylene (PP), rated up to 100 °C.
Need a price for ECW 208?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
