ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
105 × 40 mm

Bearing end covers

ECY 211

A polypropylene end cover for 211-size ball bearing units. 105 mm open end, 40 mm deep, pressed in by hand.

Outside D
105 mm
Width B
40 mm
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

ECY 211 is an end cover for 211-size ball bearing units. It closes the housing over the end of the shaft so the rotating parts stay enclosed and the bearing is better shielded from dirt.

Built for larger units

Size 211 units carry bigger shafts, and this cover is sized to match: 105 mm across the open end, 95.7 mm across the closed end and 40 mm deep. That depth leaves room for the shaft end and locking collar.

Material and dimensions

It is moulded from polypropylene (PP) and weighs about 50 g. The material resists most chemicals and is rated for temperatures up to 100 °C.

  • Outside diameter at open end (D1): 105 mm
  • Outside diameter at closed end (D): 95.7 mm
  • Anchorage diameter (D2): 106.5 mm
  • Overall width (A): 40 mm
  • Weight: approx. 50 g
  • Material: Polypropylene (PP)

Fitting and removal

  1. Clean grease and grit out of the housing bore.
  2. Set the cover square against the opening.
  3. Press evenly with both hands until the rim is flush.

Removal is a straight pull, and it goes back in the same way after maintenance.

Before you order

Check your housing opening against the 105 mm open-end size and make sure the shaft end fits within 40 mm.

Where it is used

  • Bulk material conveyors
  • Quarry and aggregate plant
  • Sawmill lines
  • Industrial dryers and fans

Key features

  • 40 mm depth
  • Fits 211-size units
  • PP, about 50 g
  • Fits by hand, no tools
  • Rated up to 100 °C

Typical applications

  • Bulk material conveyors
  • Quarry and aggregate plant
  • Sawmill lines
  • Industrial dryers and fans

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for ECY 211
Outside diameter (D) 105 mm
Width (B) 40 mm
Mass 0.05 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for ECY 211
Operating temperature range Up to +100 °C

Design and execution

Design & execution for ECY 211
Ring & ball material Polypropylene (PP)

Identification

Identification for ECY 211
Part number ECY 211
Manufacturer part number ECY 211

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for ECY 211
Manufacturer Their designation Our equivalent
SKF ECY 211 ECY 211

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What unit is ECY 211 for?

211-size ball bearing units with a 105 mm housing opening.

How deep is it?

40 mm overall.

Is it hard to fit?

No. It presses in by hand.

What temperature can it handle?

Up to 100 °C.

Need a price for ECY 211?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
ECY 211 Price on application
Get a quote

Quote for ECY 211

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.