ECW 207
A deep polypropylene end cover for 207-size ball bearing units. 74 mm open end, 35 mm deep.
- Outside D
- 74 mm
- Width B
- 35 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECW 207 is an end cover for 207-size ball bearing units. It fits into the housing over the shaft end, keeping the rotating shaft enclosed and helping to keep contamination out of the bearing area.
Deep cover for longer shafts
With 35 mm of depth, ECW 207 gives 8 mm more room than the ECY 207. The open end measures 74 mm and the closed end 64.3 mm, with a 75.6 mm anchorage diameter.
Material and dimensions
The body is polypropylene (PP), around 23 g in weight. It stays rigid, copes with most chemicals and works at temperatures up to 100 °C.
- Outside diameter at open end (D1): 74 mm
- Outside diameter at closed end (D): 64.3 mm
- Anchorage diameter (D2): 75.6 mm
- Overall width (A): 35 mm
- Weight: approx. 23 g
- Material: Polypropylene (PP)
Fitting and removal
- Clean the housing bore.
- Place the cover square to the opening.
- Press it in by hand until it seats fully.
A straight pull takes it out for servicing, and it goes back in the same way.
Before you order
Check for a 74 mm housing opening and confirm the shaft end fits within 35 mm. Tell us your unit designation and we will check it.
Where it is used
- Bulk handling conveyors
- Printing and paper machines
- Crop processing equipment
- Air movers and fans
Key features
- Deep 35 mm body
- Fits 207-size units
- PP, about 23 g
- Fits by hand
- Rated up to 100 °C
Typical applications
- Bulk handling conveyors
- Printing and paper machines
- Crop processing equipment
- Air movers and fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 74 mm |
|---|---|
| Width (B) | 35 mm |
| Mass | 0.023 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECW 207 |
|---|---|
| Manufacturer part number | ECW 207 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECW 207 |
ECW 207 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What is ECW 207 for?
207-size ball bearing units with a 74 mm housing opening.
How does it compare with ECY 207?
ECW 207 is 35 mm deep and ECY 207 is 27 mm deep.
Is it hard to fit?
No. It presses in by hand.
What is the temperature limit?
100 °C.
Need a price for ECW 207?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
