ECB 510
A deep TPU end cover for size 10 ball bearing units. 105.3 mm at the open end, 40 mm deep, pressed in by hand.
- Outside D
- 105.3 mm
- Width B
- 40 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECB 510 is a full end cover for size 10 ball bearing units. Once pressed into the housing it closes off the shaft end completely. Nothing turns in the open for a sleeve or glove to catch on, and less dirt gets near the bearing seal.
More depth than the /D versions
At 40 mm overall, ECB 510 is deeper than the ECB 510/D and ECB 510-50M/D. That extra room helps when the shaft runs a little past the locking collar, or when the collar itself sits further out. The open end is 105.3 mm and the closed end is 84.2 mm.
Material and dimensions
The cover is moulded from TPU (thermoplastic polyurethane), a tough and slightly elastic plastic. It snaps into the bore under hand pressure and holds its place. Grease, oil and wash-down chemicals do not bother it, and its operating limit is 100 °C.
- Outside diameter at open end (D1): 105.3 mm
- Outside diameter at closed end (D): 84.2 mm
- Anchorage diameter (D2): 101 mm
- Overall width (A): 40 mm
- Weight: approx. 30 g
- Material: Thermoplastic polyurethane (TPU)
Fitting and removal
- Clean old grease and grit out of the housing opening.
- Set the cover square against the bore.
- Press evenly with both hands until the rim is flush with the housing.
Removal is just as easy: pull it straight out, do the maintenance, then press it back in.
Before you order
Check your housing opening against the 105.3 mm open-end size. If space in front of the unit is tight, the shallower ECB 510/D may suit you better.
Where it is used
- Bulk material conveyors
- Sawmill and wood-processing lines
- Agricultural machinery
- Industrial fans and dryers
Key features
- Deep 40 mm body
- Fits size 10 units
- Fits by hand, no tools
- Resists grease, oil and cleaners
- Rated up to 100 °C
Typical applications
- Bulk material conveyors
- Sawmill and wood-processing lines
- Agricultural machinery
- Industrial fans and dryers
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 105.3 mm |
|---|---|
| Width (B) | 40 mm |
| Mass | 0.03 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Thermoplastic polyurethane (TPU) |
|---|
Identification
| Part number | ECB 510 |
|---|---|
| Manufacturer part number | ECB 510 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECB 510 |
ECB 510 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What unit is ECB 510 for?
Size 10 ball bearing units with a 105.3 mm housing opening.
Why choose ECB 510 over ECB 510/D?
ECB 510 is 40 mm deep, which gives more room for a long shaft end or collar. The /D version is about 34.6 mm deep.
Is it hard to fit?
No. It presses in by hand, with no screws or tools.
What temperature can it take?
It is rated for use up to 100 °C.
Need a price for ECB 510?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
