ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
12.7 × 32.9 mm

Flanged ball bearing units

F2B 008-TF-AH

Oval 2-bolt flanged ball bearing unit for air handling equipment. 1/2 in (12.7 mm) bore, cast iron housing, set screw locking.

Bore d
12.7 mm
Width B
32.9 mm
Dynamic C
9.56 kN
Static C₀
4.75 kN
Limiting speed
9,500 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 008-TF-AH is an oval two-bolt flanged ball bearing unit made for air handling equipment. It takes a 1/2 in (12.7 mm) shaft and combines a cast iron flange housing with a sealed, regreasable insert bearing, built to North American inch standards.

Built for fans and blowers

The AH version is intended for air handling duty such as fan and blower shafts. Its dimensions and load ratings match the standard F2B 008-TF, so it bolts onto the same 76.2 mm hole pattern.

Locking and sealing

The YAR 203-008-2F insert has an extended inner ring held on the shaft by two set screws. Contact seals with flingers on both sides help keep airborne dust out of the bearing.

Specifications

  • Shaft diameter (d): 1/2 in (12.7 mm)
  • Bolt hole centres (J): 76.2 mm
  • Overall height (H): 98.4 mm
  • Overall length (L): 60.3 mm
  • Housing width (A): 24 mm
  • Overall width (T): 32.9 mm
  • Inner ring width (B1): 27.4 mm
  • Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
  • Basic dynamic load rating (C): 9.56 kN
  • Basic static load rating (C0): 4.75 kN
  • Fatigue load limit (Pu): 0.2 kN
  • Limiting speed: 9 500 r/min (h6 shaft)
  • Insert bearing: YAR 203-008-2F (extended inner ring, set screw locking)
  • Locking: Two #10-32 UNF set screws, tightened to about 4 N·m
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.382 kg

Mounting tips

  1. Check that the shaft is clean and free of burrs.
  2. Fit the unit and bolt the flange to the fan frame with 3/8 in or M10 bolts.
  3. Align the shaft, then tighten both set screws to about 4 N·m.
  4. Regrease through the fitting at the intervals your fan maker recommends.

Typical applications

  • Centrifugal and axial fans
  • Air handling units
  • Blowers and ventilation equipment
  • HVAC plant

Key features

  • Specified for air handling
  • Fits 1/2 in (12.7 mm) shafts
  • Set screw locking
  • Seal and flinger on both sides
  • Grease fitting for relubrication

Typical applications

  • Centrifugal and axial fans
  • Air handling units
  • Blowers and ventilation equipment
  • HVAC plant

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 008-TF-AH
Bore diameter (d) 12.7 mm
Width (B) 32.9 mm
Mass 0.382 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 008-TF-AH
Basic dynamic load rating (C) 9.56 kN
Basic static load rating (C₀) 4.75 kN
Fatigue load limit (Pu) 0.2 kN
Limiting speed 9500 r/min

Design and execution

Design & execution for F2B 008-TF-AH
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 008-TF-AH
Part number F2B 008-TF-AH
Manufacturer part number F2B 008-TF-AH
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 008-TF-AH
Manufacturer Their designation Our equivalent
SKF F2B 008-TF-AH F2B 008-TF-AH

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What is the difference between F2B 008-TF-AH and F2B 008-TF?

They share the same dimensions and load ratings. The AH version is specified for air handling applications such as fans.

What shaft size does it fit?

A 1/2 in (12.7 mm) shaft.

What is the bolt spacing?

76.2 mm between the two bolt holes.

What is the limiting speed?

9 500 r/min with an h6 shaft.

Need a price for F2B 008-TF-AH?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 008-TF-AH Price on application
Get a quote

Quote for F2B 008-TF-AH

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.