ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
19.05 × 37.4 mm

Flanged ball bearing units

F2B 012-RM

Compact 2-bolt oval flange unit for 3/4 in (19.05 mm) shafts, with a narrow inner ring insert and set screw locking.

Bore d
19.05 mm
Width B
37.4 mm
Dynamic C
12.7 kN
Static C₀
6.55 kN
Limiting speed
8,500 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 012-RM is a two-bolt oval flanged ball bearing unit for 3/4 in (19.05 mm) shafts. It combines a cast iron housing with a sealed insert bearing that has a narrow inner ring, so the unit stays short along the shaft. Its dimensions follow North American inch standards.

Why the narrow inner ring matters

At 25.5 mm, the inner ring of the YAT 204-012 insert is about 5.5 mm narrower than on the F2B 012-TF. That leaves more free shaft next to the housing for a pulley, sprocket or coupling. The insert is locked with set screws and sealed on both sides.

Specifications

  • Shaft diameter (d): 3/4 in (19.05 mm)
  • Bolt hole centres (J): 89.7 mm
  • Overall height (H): 113 mm
  • Overall length (L): 60.3 mm
  • Housing width (A): 29 mm
  • Overall width (T): 37.4 mm
  • Inner ring width (B1): 25.5 mm
  • Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
  • Basic dynamic load rating (C): 12.7 kN
  • Basic static load rating (C0): 6.55 kN
  • Fatigue load limit (Pu): 0.28 kN
  • Limiting speed: 8 500 r/min (h6 shaft)
  • Insert bearing: YAT 204-012 (narrow inner ring, set screw locking)
  • Locking: Set screws (1/4-28 UNF), about 4 N·m
  • Sealing: Contact seal on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.41 kg

Mounting tips

  1. Clean the shaft and remove any burrs.
  2. Slide the unit on and bolt it down with two 3/8 in or M10 bolts on 89.7 mm centres.
  3. Align the shaft, then tighten the 1/4-28 UNF set screws to about 4 N·m.
  4. Regrease through the fitting as part of routine maintenance.

If you want to close off the shaft end, this unit takes our ECY 204 end cover.

Typical applications

  • Compact conveyor drives
  • Packaging machines
  • Light material handling
  • Machine frames with limited shaft length

Key features

  • Fits 3/4 in (19.05 mm) shafts
  • Narrow 25.5 mm inner ring
  • Set screw locking
  • Sealed on both sides
  • Takes the ECY 204 end cover

Typical applications

  • Compact conveyor drives
  • Packaging machines
  • Light material handling
  • Machine frames with limited shaft length

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 012-RM
Bore diameter (d) 19.05 mm
Width (B) 37.4 mm
Mass 0.41 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 012-RM
Basic dynamic load rating (C) 12.7 kN
Basic static load rating (C₀) 6.55 kN
Fatigue load limit (Pu) 0.28 kN
Limiting speed 8500 r/min

Design and execution

Design & execution for F2B 012-RM
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 012-RM
Part number F2B 012-RM
Manufacturer part number F2B 012-RM
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 012-RM
Manufacturer Their designation Our equivalent
SKF F2B 012-RM F2B 012-RM

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft size does F2B 012-RM fit?

A 3/4 in (19.05 mm) shaft.

How is it different from F2B 012-TF?

It uses a narrow inner ring (25.5 mm) instead of an extended one (31 mm), so it takes up less room along the shaft.

What bolts does it need?

Two 3/8 in or M10 bolts on 89.7 mm centres.

Is there an end cover for it?

Yes. The ECY 204 end cover fits this unit.

Need a price for F2B 012-RM?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 012-RM Price on application
Get a quote

Quote for F2B 012-RM

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.