ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
19.05 × 42.6 mm

Flanged ball bearing units

F2B 012-FM

Oval 2-bolt cast iron flanged ball bearing unit for 3/4 in shafts, with eccentric collar locking and a 12.7 kN dynamic load rating.

Bore d
19.05 mm
Width B
42.6 mm
Dynamic C
12.7 kN
Static C₀
6.55 kN
Limiting speed
8,500 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 012-FM is a two-bolt oval flanged ball bearing unit for 3/4 in (19.05 mm) shafts. A cast iron housing carries a sealed insert bearing that locks to the shaft with an eccentric collar. It follows North American inch standards and is the largest of our F2B units.

A step up in size and load

Compared with the 008 and 010 units, the F2B 012-FM has a bigger housing: 113 mm tall, 29 mm wide and with bolt holes 89.7 mm apart. The YET 204-012 insert raises the dynamic load rating to 12.7 kN and the static rating to 6.55 kN.

Eccentric collar locking

The collar is turned in the direction of shaft rotation until it grips, then held with its set screw. To close off the shaft end for safety, the unit can take an ECY 204 end cover.

Specifications

  • Shaft diameter (d): 3/4 in (19.05 mm)
  • Bolt hole centres (J): 89.7 mm
  • Overall height (H): 113 mm
  • Overall length (L): 60.3 mm
  • Housing width (A): 29 mm
  • Overall width (T): 42.6 mm
  • Inner ring width (B1): 30.5 mm
  • Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
  • Basic dynamic load rating (C): 12.7 kN
  • Basic static load rating (C0): 6.55 kN
  • Fatigue load limit (Pu): 0.28 kN
  • Limiting speed: 8 500 r/min (h6 shaft)
  • Insert bearing: YET 204-012 (narrow inner ring, eccentric locking collar)
  • Locking: Eccentric collar with a 1/4-28 UNF set screw, tightened to about 4 N·m
  • Sealing: Contact seal on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.469 kg

Mounting tips

  1. Fit the unit on a clean shaft and bolt it down through both holes.
  2. Slide the collar onto the inner ring.
  3. Turn it in the running direction until it locks, then tighten the set screw to about 4 N·m.
  4. Relubricate through the grease fitting as part of maintenance.

Typical applications

  • Belt and chain conveyors
  • Agricultural machinery
  • Industrial drives
  • Material handling equipment

Key features

  • Fits 3/4 in (19.05 mm) shafts
  • Eccentric collar locking
  • Higher 12.7 kN dynamic rating
  • 89.7 mm bolt centres
  • Sealed, with grease fitting

Typical applications

  • Belt and chain conveyors
  • Agricultural machinery
  • Industrial drives
  • Material handling equipment

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 012-FM
Bore diameter (d) 19.05 mm
Width (B) 42.6 mm
Mass 0.469 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 012-FM
Basic dynamic load rating (C) 12.7 kN
Basic static load rating (C₀) 6.55 kN
Fatigue load limit (Pu) 0.28 kN
Limiting speed 8500 r/min

Design and execution

Design & execution for F2B 012-FM
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 012-FM
Part number F2B 012-FM
Manufacturer part number F2B 012-FM
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 012-FM
Manufacturer Their designation Our equivalent
SKF F2B 012-FM F2B 012-FM

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft size does F2B 012-FM fit?

A 3/4 in (19.05 mm) shaft.

How far apart are the bolt holes?

89.7 mm between centres.

What end cover suits this unit?

The ECY 204 end cover fits this unit if you want to close off the shaft end.

How is it locked?

With an eccentric collar turned in the direction of rotation and secured by a set screw.

Need a price for F2B 012-FM?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 012-FM Price on application
Get a quote

Quote for F2B 012-FM

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.