ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
40 × 60.3 mm

Flanged ball bearing units

F2B 40M-WF

40 mm oval flange unit with a wide 56.3 mm inner ring and eccentric collar locking.

Bore d
40 mm
Width B
60.3 mm
Dynamic C
30.7 kN
Static C₀
19 kN
Limiting speed
4,800 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 40M-WF is a two-bolt oval flange unit for 40 mm shafts with a wide inner ring and eccentric collar locking. The sealed YEL 208-2F insert sits in a cast iron housing.

Longest grip in the 40 mm range

The 56.3 mm inner ring is the widest of our 40 mm units, so it supports the shaft over more of its length. The eccentric collar is secured with an M10x1 set screw.

Specifications

  • Shaft diameter (d): 40 mm
  • Bolt hole centres (J): 143.8 mm
  • Overall height (H): 171.5 mm
  • Overall length (L): 104.8 mm
  • Housing width (A): 38.9 mm
  • Overall width (T): 60.3 mm
  • Inner ring width (B1): 56.3 mm
  • Bolt holes (N): 14.3 mm, for M12 bolts
  • Basic dynamic load rating (C): 30.7 kN
  • Basic static load rating (C0): 19 kN
  • Fatigue load limit (Pu): 0.8 kN
  • Limiting speed: 4 800 r/min (h6 shaft)
  • Insert bearing: YEL 208-2F (extended inner ring, eccentric locking collar)
  • Locking: Eccentric collar with an M10x1 set screw
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 1.67 kg

How to fit it

  1. Mount the unit and bolt it down with M12 bolts.
  2. Slide the collar onto the inner ring.
  3. Turn it in the running direction until it grips.
  4. Tighten the M10x1 set screw.

Where it is used

  • Heavy one-way conveyors
  • Agricultural drives
  • Mixers and agitators
  • Bulk handling

Key features

  • Fits 40 mm shafts
  • Wide 56.3 mm inner ring
  • Eccentric collar locking
  • Seals with flingers
  • Takes the ECY 208 end cover

Typical applications

  • Heavy one-way conveyors
  • Agricultural drives
  • Mixers and agitators
  • Bulk handling

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 40M-WF
Bore diameter (d) 40 mm
Width (B) 60.3 mm
Mass 1.67 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 40M-WF
Basic dynamic load rating (C) 30.7 kN
Basic static load rating (C₀) 19 kN
Fatigue load limit (Pu) 0.8 kN
Limiting speed 4800 r/min

Design and execution

Design & execution for F2B 40M-WF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 40M-WF
Part number F2B 40M-WF
Manufacturer part number F2B 40M-WF
Conforms to standard North American, metric bore

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 40M-WF
Manufacturer Their designation Our equivalent
SKF F2B 40M-WF F2B 40M-WF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What is special about F2B 40M-WF?

It has the widest inner ring of our 40 mm units, at 56.3 mm.

What shaft does it fit?

A 40 mm shaft.

What is the overall width?

60.3 mm.

What end cover fits?

The ECY 208 end cover.

Need a price for F2B 40M-WF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 40M-WF Price on application
Get a quote

Quote for F2B 40M-WF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.