F2B 20M-TF
Metric 20 mm oval flange unit with an extended inner ring, set screw locking and flinger seals.
- Bore d
- 20 mm
- Width B
- 37.4 mm
- Dynamic C
- 12.7 kN
- Static C₀
- 6.55 kN
- Limiting speed
- 8,500 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 20M-TF is a two-bolt oval flanged ball bearing unit for 20 mm shafts. The cast iron housing carries a sealed insert with an extended inner ring that is fixed to the shaft with set screws.
Set screws for both directions
Set screw locking holds the bearing whether the shaft turns one way or reverses, so this unit suits a wide range of drives. The 31 mm inner ring and the flinger-backed seals on both sides add support and protection.
Specifications
- Shaft diameter (d): 20 mm
- Bolt hole centres (J): 89.7 mm
- Housing width (A): 29 mm
- Overall width (T): 37.4 mm
- Inner ring width (B1): 31 mm
- Attachment bolts: M10 bolts
- Basic dynamic load rating (C): 12.7 kN
- Basic static load rating (C0): 6.55 kN
- Limiting speed: 8 500 r/min (h6 shaft)
- Locking: Set screws in the extended inner ring
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.425 kg
Mounting tips
- Clean the shaft and check it for burrs.
- Fit the unit and bolt it down with two M10 bolts.
- Align the shaft and tighten the set screws evenly.
- Regrease through the housing fitting as needed.
Typical applications
- Reversing conveyors
- Packaging lines
- Metric machine frames
- Agricultural equipment
Key features
- Fits 20 mm metric shafts
- Extended 31 mm inner ring
- Set screw locking
- Seals with flingers
- About 0.43 kg
Typical applications
- Reversing conveyors
- Packaging lines
- Metric machine frames
- Agricultural equipment
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 20 mm |
|---|---|
| Width (B) | 37.4 mm |
| Mass | 0.425 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 12.7 kN |
|---|---|
| Basic static load rating (C₀) | 6.55 kN |
| Limiting speed | 8500 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 20M-TF |
|---|---|
| Manufacturer part number | F2B 20M-TF |
| Conforms to standard | North American, metric bore |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 20M-TF |
F2B 20M-TF |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft size does F2B 20M-TF fit?
A 20 mm shaft.
Can it handle reversing shafts?
Yes. Set screw locking suits constant or alternating rotation.
How wide is the unit overall?
37.4 mm.
What is the dynamic load rating?
12.7 kN.
Need a price for F2B 20M-TF?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
