ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
15.875 × 32.9 mm

Flanged ball bearing units

F2B 010-TF-AH

Air handling version of the oval 2-bolt flange unit for 5/8 in shafts. Cast iron housing, set screw locking, flinger seals.

Bore d
15.875 mm
Width B
32.9 mm
Dynamic C
9.56 kN
Static C₀
4.75 kN
Limiting speed
9,500 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 010-TF-AH is the air handling version of our 5/8 in (15.875 mm) oval flange unit. A cast iron two-bolt housing carries a sealed insert bearing with set screw locking, ready to bolt onto a fan frame or air handling unit. It follows North American inch standards.

Made for air handling duty

Fan shafts often run for long hours at steady speed. This unit is specified for that kind of air handling work, while keeping the same 76.2 mm bolt spacing, 98.4 mm height and load ratings as the F2B 010-TF.

Inside the unit

The YAR 203-010-2F insert has an extended 27.4 mm inner ring fixed with two set screws. A flinger and a contact seal on each side keep dust drawn in with the air away from the balls and raceways.

Specifications

  • Shaft diameter (d): 5/8 in (15.875 mm)
  • Bolt hole centres (J): 76.2 mm
  • Overall height (H): 98.4 mm
  • Overall length (L): 60.3 mm
  • Housing width (A): 24 mm
  • Overall width (T): 32.9 mm
  • Inner ring width (B1): 27.4 mm
  • Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
  • Basic dynamic load rating (C): 9.56 kN
  • Basic static load rating (C0): 4.75 kN
  • Fatigue load limit (Pu): 0.2 kN
  • Limiting speed: 9 500 r/min (h6 shaft)
  • Insert bearing: YAR 203-010-2F (extended inner ring, set screw locking)
  • Locking: Two #10-32 UNF set screws, tightened to about 4 N·m
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.366 kg

Mounting tips

  1. Clean the fan shaft and check for burrs.
  2. Bolt the flange to the frame with 3/8 in or M10 bolts.
  3. Align the shaft and tighten both set screws to about 4 N·m.
  4. Regrease through the fitting on your normal service schedule.

Typical applications

  • Fan shafts
  • Air handling and HVAC units
  • Blowers
  • Ventilation systems

Key features

  • Specified for air handling
  • Fits 5/8 in (15.875 mm) shafts
  • Set screw locking
  • Seals with flingers on both sides
  • Up to 9 500 r/min

Typical applications

  • Fan shafts
  • Air handling and HVAC units
  • Blowers
  • Ventilation systems

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 010-TF-AH
Bore diameter (d) 15.875 mm
Width (B) 32.9 mm
Mass 0.366 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 010-TF-AH
Basic dynamic load rating (C) 9.56 kN
Basic static load rating (C₀) 4.75 kN
Fatigue load limit (Pu) 0.2 kN
Limiting speed 9500 r/min

Design and execution

Design & execution for F2B 010-TF-AH
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 010-TF-AH
Part number F2B 010-TF-AH
Manufacturer part number F2B 010-TF-AH
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 010-TF-AH
Manufacturer Their designation Our equivalent
SKF F2B 010-TF-AH F2B 010-TF-AH

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What is F2B 010-TF-AH used for?

It is specified for air handling equipment such as fans and blowers.

What shaft does it fit?

A 5/8 in (15.875 mm) shaft.

Is it interchangeable with F2B 010-TF?

It has the same dimensions and load ratings, so it fits the same mounting.

What is the limiting speed?

9 500 r/min with an h6 shaft.

Need a price for F2B 010-TF-AH?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 010-TF-AH Price on application
Get a quote

Quote for F2B 010-TF-AH

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.