F2B 010-FM
Two-bolt oval flanged ball bearing unit for 5/8 in shafts, locked with an eccentric collar. Cast iron housing, sealed insert.
- Bore d
- 15.875 mm
- Width B
- 39.1 mm
- Dynamic C
- 9.56 kN
- Static C₀
- 4.75 kN
- Limiting speed
- 9,500 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 010-FM is a cast iron, two-bolt oval flange unit for 5/8 in (15.875 mm) shafts. Inside is a sealed insert bearing held on the shaft by an eccentric locking collar. The unit follows North American inch standards and bolts straight onto a frame or machine wall.
Same housing as F2B 008-FM, bigger bore
This unit uses the same 76.2 mm bolt pattern, 98.4 mm height and load ratings as the F2B 008-FM. The difference is the YET 203-010 insert, which takes a 5/8 in shaft. That makes it easy to standardise on one housing size across machines with different shaft sizes.
Specifications
- Shaft diameter (d): 5/8 in (15.875 mm)
- Bolt hole centres (J): 76.2 mm
- Overall height (H): 98.4 mm
- Overall length (L): 60.3 mm
- Housing width (A): 24 mm
- Overall width (T): 39.1 mm
- Inner ring width (B1): 28.6 mm
- Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
- Basic dynamic load rating (C): 9.56 kN
- Basic static load rating (C0): 4.75 kN
- Fatigue load limit (Pu): 0.2 kN
- Limiting speed: 9 500 r/min (h6 shaft)
- Insert bearing: YET 203-010 (narrow inner ring, eccentric locking collar)
- Locking: Eccentric collar with a 1/4-28 UNF set screw, tightened to about 4 N·m
- Sealing: Contact seal on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.375 kg
Fitting the collar
- Mount the unit on the shaft and bolt it to the frame.
- Slide the eccentric collar over the inner ring.
- Rotate it in the running direction of the shaft until it grips firmly.
- Lock it with the set screw at about 4 N·m.
Typical applications
- Roller and belt conveyors
- Farm and garden machinery
- Light industrial drives
- Material handling lines
Key features
- Fits 5/8 in (15.875 mm) shafts
- Eccentric collar locking
- Sealed insert bearing
- Cast iron oval flange
- Relubrication fitting
Typical applications
- Roller and belt conveyors
- Farm and garden machinery
- Light industrial drives
- Material handling lines
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 15.875 mm |
|---|---|
| Width (B) | 39.1 mm |
| Mass | 0.375 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 9.56 kN |
|---|---|
| Basic static load rating (C₀) | 4.75 kN |
| Fatigue load limit (Pu) | 0.2 kN |
| Limiting speed | 9500 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 010-FM |
|---|---|
| Manufacturer part number | F2B 010-FM |
| Conforms to standard | North American (inch) |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 010-FM |
F2B 010-FM |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft does F2B 010-FM fit?
A 5/8 in (15.875 mm) shaft.
How is it locked?
An eccentric collar is turned in the direction of rotation and then held with a set screw.
How does it compare with F2B 008-FM?
Same housing and load ratings. Only the bore is larger: 5/8 in instead of 1/2 in.
Does it have a grease fitting?
Yes, so the bearing can be relubricated.
Need a price for F2B 010-FM?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
