ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
30 × 44.2 mm

Flanged ball bearing units

F2B 30M-LF

30 mm oval flange unit with concentric locking for an even grip around the shaft.

Bore d
30 mm
Width B
44.2 mm
Dynamic C
19.5 kN
Static C₀
11.2 kN
Limiting speed
6,300 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 30M-LF is a two-bolt oval flange unit for 30 mm shafts that uses concentric locking instead of set screws or an eccentric collar. Its YSP 206 SB-2F insert sits in a cast iron housing, with seals and flingers on both sides.

Concentric locking

Concentric locking grips the shaft evenly all the way around rather than at one or two points. This spreads the clamping force around the shaft and avoids the point contact of set screws, which can mark a shaft. Locking is done by tightening an M5 screw.

Specifications

  • Shaft diameter (d): 30 mm
  • Bolt hole centres (J): 116.7 mm
  • Overall height (H): 141.3 mm
  • Overall length (L): 79.4 mm
  • Housing width (A): 34.9 mm
  • Overall width (T): 44.2 mm
  • Inner ring width (B1): 37.2 mm
  • Bolt holes (N): 12.7 mm, for M10 bolts
  • Basic dynamic load rating (C): 19.5 kN
  • Basic static load rating (C0): 11.2 kN
  • Fatigue load limit (Pu): 0.475 kN
  • Limiting speed: 6 300 r/min (h6 shaft)
  • Insert bearing: YSP 206 SB-2F (concentric locking)
  • Locking: Concentric locking, tightened with an M5 screw
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.854 kg

Mounting tips

  1. Clean the 30 mm shaft.
  2. Bolt the unit down with two M10 bolts on 116.7 mm centres.
  3. Align the shaft.
  4. Tighten the M5 locking screw to secure the insert.

Typical applications

  • Fans and blowers
  • Conveyor head and tail shafts
  • Food and packaging machinery
  • Drives where shaft marking must be avoided

Key features

  • Fits 30 mm metric shafts
  • Concentric locking
  • Seals with flingers
  • 19.5 kN dynamic rating
  • Takes the ECY 206 end cover

Typical applications

  • Fans and blowers
  • Conveyor head and tail shafts
  • Food and packaging machinery
  • Drives where shaft marking must be avoided

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 30M-LF
Bore diameter (d) 30 mm
Width (B) 44.2 mm
Mass 0.854 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 30M-LF
Basic dynamic load rating (C) 19.5 kN
Basic static load rating (C₀) 11.2 kN
Fatigue load limit (Pu) 0.475 kN
Limiting speed 6300 r/min

Design and execution

Design & execution for F2B 30M-LF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 30M-LF
Part number F2B 30M-LF
Manufacturer part number F2B 30M-LF
Conforms to standard North American, metric bore

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 30M-LF
Manufacturer Their designation Our equivalent
SKF F2B 30M-LF F2B 30M-LF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

How does F2B 30M-LF lock to the shaft?

With concentric locking that grips the shaft evenly all the way around, tightened by an M5 screw.

What shaft does it fit?

A 30 mm shaft.

What is the overall width?

44.2 mm.

What end cover fits?

The ECY 206 end cover.

Need a price for F2B 30M-LF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 30M-LF Price on application
Get a quote

Quote for F2B 30M-LF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.