ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
23.813 × 38.9 mm

Flanged ball bearing units

F2B 015-TF

Oval flange bearing unit for 15/16 in shafts with set screw locking and seals plus flingers.

Bore d
23.813 mm
Width B
38.9 mm
Dynamic C
14 kN
Static C₀
7.8 kN
Limiting speed
7,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 015-TF is made for 15/16 in (23.813 mm) shafts, a size that sits between the common 7/8 in and 1 in standards. It uses the same cast iron two-bolt oval housing as our 014 units, with a sealed insert locked by set screws.

Same housing, different bore

Because it shares the 98.8 mm bolt pattern, 123.8 mm height and 14 kN rating of the F2B 014-TF, you can change shaft size without drilling new mounting holes. The YAR 205-015-2F insert has an extended 34.1 mm inner ring with flingers and seals on both sides.

Specifications

  • Shaft diameter (d): 15/16 in (23.813 mm)
  • Bolt hole centres (J): 98.8 mm
  • Overall height (H): 123.8 mm
  • Overall length (L): 69.9 mm
  • Housing width (A): 29.6 mm
  • Overall width (T): 38.9 mm
  • Inner ring width (B1): 34.1 mm
  • Bolt holes (N): 12.7 mm, for 7/16 in bolts
  • Basic dynamic load rating (C): 14 kN
  • Basic static load rating (C0): 7.8 kN
  • Fatigue load limit (Pu): 0.335 kN
  • Limiting speed: 7 000 r/min (h6 shaft)
  • Insert bearing: YAR 205-015-2F (extended inner ring, set screw locking)
  • Locking: Set screws (1/4-28 UNF), about 4 N·m
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.61 kg

Mounting tips

  1. Make sure the shaft is clean and true.
  2. Slide the unit on and bolt it down with 7/16 in bolts.
  3. Align, then tighten the set screws to about 4 N·m.
  4. Relubricate through the fitting as part of normal service.

Typical applications

  • Conveyors with 15/16 in shafts
  • Farm machinery
  • Material handling lines
  • Replacement of existing 15/16 in units

Key features

  • Fits 15/16 in (23.813 mm) shafts
  • Shares mounting with 014 units
  • Set screw locking
  • Seals with flingers
  • About 0.61 kg

Typical applications

  • Conveyors with 15/16 in shafts
  • Farm machinery
  • Material handling lines
  • Replacement of existing 15/16 in units

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 015-TF
Bore diameter (d) 23.813 mm
Width (B) 38.9 mm
Mass 0.61 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 015-TF
Basic dynamic load rating (C) 14 kN
Basic static load rating (C₀) 7.8 kN
Fatigue load limit (Pu) 0.335 kN
Limiting speed 7000 r/min

Design and execution

Design & execution for F2B 015-TF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 015-TF
Part number F2B 015-TF
Manufacturer part number F2B 015-TF
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 015-TF
Manufacturer Their designation Our equivalent
SKF F2B 015-TF F2B 015-TF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft size does F2B 015-TF fit?

15/16 in (23.813 mm).

Does it use the same housing as F2B 014-TF?

Yes. Only the bore of the insert is different.

What bolts are needed?

Two 7/16 in bolts on 98.8 mm centres.

What end cover fits?

The ECY 205 end cover.

Need a price for F2B 015-TF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 015-TF Price on application
Get a quote

Quote for F2B 015-TF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.