ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
50 × 62.7 mm

Flanged ball bearing units

F2B 50M-FM

Oval flange unit for 50 mm shafts with eccentric collar locking and a 35.1 kN dynamic rating.

Bore d
50 mm
Width B
62.7 mm
Dynamic C
35.1 kN
Static C₀
23.2 kN
Limiting speed
4,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 50M-FM is a two-bolt oval flange unit for 50 mm shafts. The cast iron housing is 189 mm tall with bolt holes 157.2 mm apart, and the sealed YET 210 insert locks with an eccentric collar.

Made for one-way drives

The eccentric collar is turned with the shaft rotation until it grips, then held by an M10x1 set screw. This suits conveyors and machines that always run in the same direction.

Specifications

  • Shaft diameter (d): 50 mm
  • Bolt hole centres (J): 157.2 mm
  • Overall height (H): 189 mm
  • Overall length (L): 115.9 mm
  • Housing width (A): 46.8 mm
  • Overall width (T): 62.7 mm
  • Inner ring width (B1): 43.7 mm
  • Bolt holes (N): 14.3 mm, for M12 bolts
  • Basic dynamic load rating (C): 35.1 kN
  • Basic static load rating (C0): 23.2 kN
  • Fatigue load limit (Pu): 0.98 kN
  • Limiting speed: 4 000 r/min (h6 shaft)
  • Insert bearing: YET 210 (narrow inner ring, eccentric locking collar)
  • Locking: Eccentric collar with an M10x1 set screw
  • Sealing: Contact seal on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 2.03 kg

How to fit it

  1. Fit the unit on a clean 50 mm shaft.
  2. Bolt it down with two M12 bolts.
  3. Turn the collar in the running direction until it is tight.
  4. Tighten the M10x1 set screw.

The ECY 210 end cover fits this unit.

Where it is used

  • Heavy belt conveyors
  • Bucket elevators
  • Agricultural machinery
  • Industrial drives

Key features

  • Fits 50 mm shafts
  • Eccentric collar locking
  • 35.1 kN dynamic rating
  • 157.2 mm bolt centres
  • Takes the ECY 210 end cover

Typical applications

  • Heavy belt conveyors
  • Bucket elevators
  • Agricultural machinery
  • Industrial drives

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 50M-FM
Bore diameter (d) 50 mm
Width (B) 62.7 mm
Mass 2.03 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 50M-FM
Basic dynamic load rating (C) 35.1 kN
Basic static load rating (C₀) 23.2 kN
Fatigue load limit (Pu) 0.98 kN
Limiting speed 4000 r/min

Design and execution

Design & execution for F2B 50M-FM
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 50M-FM
Part number F2B 50M-FM
Manufacturer part number F2B 50M-FM
Conforms to standard North American, metric bore

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 50M-FM
Manufacturer Their designation Our equivalent
SKF F2B 50M-FM F2B 50M-FM

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft does F2B 50M-FM fit?

A 50 mm shaft.

What are the load ratings?

35.1 kN dynamic and 23.2 kN static.

How tall is the housing?

189 mm.

What end cover fits?

The ECY 210 end cover.

Need a price for F2B 50M-FM?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 50M-FM Price on application
Get a quote

Quote for F2B 50M-FM

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.