F2B 35M-FM
Two-bolt oval flange bearing for 35 mm shafts with a narrow inner ring and eccentric collar locking.
- Bore d
- 35 mm
- Width B
- 52.4 mm
- Dynamic C
- 25.5 kN
- Static C₀
- 15.3 kN
- Limiting speed
- 5,300 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 35M-FM is a cast iron oval flange unit for 35 mm shafts. It steps up to M12 bolts on 130 mm centres and a 25.5 kN dynamic load rating. The sealed insert locks with an eccentric collar.
More load, same easy fit
Compared with our 30 mm units, the static rating rises to 15.3 kN. The eccentric collar grips the shaft when it is turned with the direction of rotation, so it suits drives that always run one way.
Specifications
- Shaft diameter (d): 35 mm
- Bolt hole centres (J): 130 mm
- Housing width (A): 37.3 mm
- Overall width (T): 52.4 mm
- Inner ring width (B1): 38.9 mm
- Attachment bolts: M12 bolts
- Basic dynamic load rating (C): 25.5 kN
- Basic static load rating (C0): 15.3 kN
- Limiting speed: 5 300 r/min (h6 shaft)
- Locking: Eccentric collar with set screw
- Sealing: Contact seal on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 1.2 kg
How to fit it
- Clean the 35 mm shaft.
- Bolt the flange down with two M12 bolts.
- Turn the collar in the running direction until it is tight.
- Lock it with its set screw.
Where it is used
- Medium-duty conveyors
- Grain and feed equipment
- Industrial drives
- Agricultural machinery
Key features
- Fits 35 mm shafts
- Eccentric collar locking
- 25.5 kN dynamic rating
- Sealed on both sides
- 130 mm bolt centres
Typical applications
- Medium-duty conveyors
- Grain and feed equipment
- Industrial drives
- Agricultural machinery
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 35 mm |
|---|---|
| Width (B) | 52.4 mm |
| Mass | 1.2 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 25.5 kN |
|---|---|
| Basic static load rating (C₀) | 15.3 kN |
| Limiting speed | 5300 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 35M-FM |
|---|---|
| Manufacturer part number | F2B 35M-FM |
| Conforms to standard | North American, metric bore |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 35M-FM |
F2B 35M-FM |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft size does F2B 35M-FM fit?
A 35 mm shaft.
What bolts are needed?
Two M12 bolts, 130 mm apart.
What is the limiting speed?
5 300 r/min.
How much does it weigh?
About 1.2 kg.
Need a price for F2B 35M-FM?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
