ECL 208
A PP end cap for 208-size ball bearing units. 84 mm open end, 37 mm deep, pressed in by hand.
- Outside D
- 84 mm
- Width B
- 37 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECL 208 is a plastic cap that covers the shaft end on 208-size ball bearing units. It keeps the turning shaft enclosed for safety and adds a simple shield against dust, chips and water.
Polypropylene body
The ECL 208 is moulded from polypropylene (PP) and weighs around 21 g. It is firm, light and resistant to most chemicals, with an operating limit of 100 °C.
Dimensions
The cover is 37 mm deep. It is 84 mm across the open end and 70.1 mm across the closed end, with an 84.8 mm anchorage diameter.
- Outside diameter at open end (D1): 84 mm
- Outside diameter at closed end (D): 70.1 mm
- Anchorage diameter (D2): 84.8 mm
- Overall width (A): 37 mm
- Weight: approx. 21 g
- Material: Polypropylene (PP)
Fitting and removal
- Clean out the housing opening.
- Line the cover up square with the bore.
- Push it in by hand until the rim is tight against the housing.
Pull it straight out when you need to grease or inspect the bearing.
Before you order
Make sure your housing has an 84 mm opening and that the shaft end fits inside the 37 mm depth.
Where it is used
- Medium-duty conveyors
- Sawmill equipment
- Grain handling machinery
- Industrial fans
Key features
- PP body, about 21 g
- Fits 208-size units
- Push-in, no tools
- Chemical resistant
- Rated up to 100 °C
Typical applications
- Medium-duty conveyors
- Sawmill equipment
- Grain handling machinery
- Industrial fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 84 mm |
|---|---|
| Width (B) | 37 mm |
| Mass | 0.021 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECL 208 |
|---|---|
| Manufacturer part number | ECL 208 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECL 208 |
ECL 208 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does ECL 208 fit?
208-size ball bearing units with an 84 mm housing opening.
How deep is it?
37 mm overall.
Is it easy to remove?
Yes. A straight pull takes it out.
What temperature can it take?
Up to 100 °C.
Need a price for ECL 208?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
