ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
50 × 62.5 mm

Flanged ball bearing units

F2B 50M-TF

50 mm oval flange unit with set screw locking, an extended inner ring and flinger seals.

Bore d
50 mm
Width B
62.5 mm
Dynamic C
35.1 kN
Static C₀
23.2 kN
Limiting speed
4,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 50M-TF is a cast iron two-bolt oval flange unit for 50 mm shafts. Inside is a sealed YAR 210-2F insert with an extended inner ring and set screw locking.

Locks well in either direction

Its 51.6 mm inner ring uses M10x1 set screws, so it holds the shaft whether it runs forward or in reverse. Flingers in front of the seals help in dusty and dirty places.

Specifications

  • Shaft diameter (d): 50 mm
  • Bolt hole centres (J): 157.2 mm
  • Overall height (H): 189 mm
  • Overall length (L): 115.9 mm
  • Housing width (A): 46.8 mm
  • Overall width (T): 62.5 mm
  • Inner ring width (B1): 51.6 mm
  • Bolt holes (N): 14.3 mm, for M12 bolts
  • Basic dynamic load rating (C): 35.1 kN
  • Basic static load rating (C0): 23.2 kN
  • Fatigue load limit (Pu): 0.98 kN
  • Limiting speed: 4 000 r/min (h6 shaft)
  • Insert bearing: YAR 210-2F (extended inner ring, set screw locking)
  • Locking: Set screws (M10x1)
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 2.06 kg

How to fit it

  1. Wipe the shaft clean and remove any burrs.
  2. Bolt the unit down with two M12 bolts on 157.2 mm centres.
  3. Align the shaft and tighten the set screws.
  4. Add grease through the fitting during service.

Where it is used

  • Reversing conveyors
  • Bulk material handling
  • Process lines
  • Heavy machine frames

Key features

  • Fits 50 mm shafts
  • Set screw locking
  • Extended 51.6 mm inner ring
  • Seals with flingers
  • Takes the ECY 210 end cover

Typical applications

  • Reversing conveyors
  • Bulk material handling
  • Process lines
  • Heavy machine frames

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 50M-TF
Bore diameter (d) 50 mm
Width (B) 62.5 mm
Mass 2.06 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 50M-TF
Basic dynamic load rating (C) 35.1 kN
Basic static load rating (C₀) 23.2 kN
Fatigue load limit (Pu) 0.98 kN
Limiting speed 4000 r/min

Design and execution

Design & execution for F2B 50M-TF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 50M-TF
Part number F2B 50M-TF
Manufacturer part number F2B 50M-TF
Conforms to standard North American, metric bore

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 50M-TF
Manufacturer Their designation Our equivalent
SKF F2B 50M-TF F2B 50M-TF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft size does F2B 50M-TF fit?

A 50 mm shaft.

Can it run in reverse?

Yes. Set screw locking works both ways.

What is the fatigue load limit?

0.98 kN.

How much does it weigh?

About 2.06 kg.

Need a price for F2B 50M-TF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 50M-TF Price on application
Get a quote

Quote for F2B 50M-TF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.