ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
35 × 48.4 mm

Flanged ball bearing units

F2B 35M-TR

35 mm oval flange unit with multiple-lip contact seals and flingers, made for dusty and dirty work.

Bore d
35 mm
Width B
48.4 mm
Dynamic C
25.5 kN
Static C₀
15.3 kN
Limiting speed
3,200 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 35M-TR is a two-bolt oval flange unit for 35 mm shafts with extra sealing. It is built for farm machines and handling equipment that work in dust, mud and spray.

Extra protection from dirt

Each side has a flinger plus a multiple-lip contact seal, instead of the single-lip seal on the F2B 35M-TF. The extra lips keep dirt out better but add friction, so the speed limit is lower at 3 200 r/min.

Specifications

  • Shaft diameter (d): 35 mm
  • Bolt hole centres (J): 130 mm
  • Overall height (H): 155.6 mm
  • Overall length (L): 92.1 mm
  • Housing width (A): 37.3 mm
  • Overall width (T): 48.4 mm
  • Inner ring width (B1): 42.9 mm
  • Bolt holes (N): 14.3 mm, for M12 bolts
  • Basic dynamic load rating (C): 25.5 kN
  • Basic static load rating (C0): 15.3 kN
  • Fatigue load limit (Pu): 0.655 kN
  • Limiting speed: 3 200 r/min (h6 shaft)
  • Insert bearing: YAR 207-2RF (extended inner ring, set screw locking)
  • Locking: Set screws (M6x0.75)
  • Sealing: Multiple-lip contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 1.2 kg

How to fit it

  1. Clean the shaft.
  2. Bolt the unit down with two M12 bolts on 130 mm centres.
  3. Align the shaft and tighten the M6x0.75 set screws.
  4. Regrease through the fitting and check the seals at each service.

An ECY 207 end cover can be added to close off the shaft end.

Where it is used

  • Farm and harvesting machines
  • Dusty conveyors
  • Grain handling
  • Slow to medium speed drives

Key features

  • Fits 35 mm shafts
  • Multiple-lip contact seals
  • Flingers on both sides
  • Set screw locking
  • Takes the ECY 207 end cover

Typical applications

  • Farm and harvesting machines
  • Dusty conveyors
  • Grain handling
  • Slow to medium speed drives

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 35M-TR
Bore diameter (d) 35 mm
Width (B) 48.4 mm
Mass 1.2 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 35M-TR
Basic dynamic load rating (C) 25.5 kN
Basic static load rating (C₀) 15.3 kN
Fatigue load limit (Pu) 0.655 kN
Limiting speed 3200 r/min

Design and execution

Design & execution for F2B 35M-TR
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 35M-TR
Part number F2B 35M-TR
Manufacturer part number F2B 35M-TR
Conforms to standard North American, metric bore

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 35M-TR
Manufacturer Their designation Our equivalent
SKF F2B 35M-TR F2B 35M-TR

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

How is F2B 35M-TR different from F2B 35M-TF?

It has multiple-lip seals for better protection from dirt, with a lower speed limit.

What is the limiting speed?

3 200 r/min.

What insert does it use?

A YAR 207-2RF insert bearing.

What end cover fits?

The ECY 207 end cover.

Need a price for F2B 35M-TR?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 35M-TR Price on application
Get a quote

Quote for F2B 35M-TR

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.