ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
71.4 × 29 mm

Bearing end covers

ECB 505/D

The short-body end cover in our size 05 range. 71.4 mm rim, 29 mm overall width, one-piece TPU that pushes in by hand.

Outside D
71.4 mm
Width B
29 mm
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

ECB 505/D is the short-body end cover in our size 05 range. It closes off the open end of the bearing unit housing so the rotating shaft is covered. The machine is safer to work around, and less contamination gets to the bearing.

Short cover, same housing fit

It goes into a 71.4 mm housing opening but stands only 29 mm proud of the housing face. Use it where a full-depth cover would hit a guard, bracket or neighbouring part. From the rim it tapers to 53.2 mm at the closed end.

Material and dimensions

The cover is a one-piece TPU part. TPU resists oil, grease and the detergents used in wash-down areas, and it stays usable up to 100 °C. The slight flex in the material lets it lock into the housing with hand pressure alone.

  • Outside diameter at open end (D1): 71.4 mm
  • Outside diameter at closed end (D): 53.2 mm
  • Anchorage diameter (D2): 66.9 mm
  • Overall width (A): 29 mm
  • Weight: approx. 20 g
  • Material: TPU

Fitting and removal

  1. Clear old grease and debris from the housing bore.
  2. Position the cover square to the opening.
  3. Push evenly all the way round until the rim sits tight against the housing.

The cover comes out with a straight pull when you need to get at the bearing, and pushes back in once you are finished.

Before you order

Check that the housing opening is 71.4 mm and that nothing on the shaft side stands out more than 29 mm. If it does, the standard ECB 505 with 34.5 mm depth gives more room. We are happy to check the fit against your unit designation.

Where it is used

  • Food and packaging lines
  • Conveyor rollers and idlers
  • Farm machinery
  • HVAC fans
  • Equipment with limited space next to the bearing

Key features

  • 29 mm overall width for cramped spaces
  • Hand-fitted, no tools required
  • TPU copes with oil, grease and detergents
  • Rated to 100 °C
  • Removable and reusable

Typical applications

  • Food and packaging lines
  • Conveyor rollers and idlers
  • Farm machinery
  • HVAC fans
  • Equipment with limited space next to the bearing

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for ECB 505/D
Outside diameter (D) 71.4 mm
Width (B) 29 mm
Mass 0.02 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for ECB 505/D
Operating temperature range Up to +100 °C

Design and execution

Design & execution for ECB 505/D
Ring & ball material Thermoplastic polyurethane (TPU)

Identification

Identification for ECB 505/D
Part number ECB 505/D
Manufacturer part number ECB 505/D

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for ECB 505/D
Manufacturer Their designation Our equivalent
SKF ECB 505/D ECB 505/D

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

Which units is the ECB 505/D for?

Size 05 ball bearing units with a 71.4 mm housing opening.

Why choose the /D version?

It is only 29 mm deep, so it fits where a standard-depth cover would touch a guard or nearby part.

How do I fit it?

Clean the opening, hold the cover square and press it in evenly by hand.

What is the temperature limit?

It is rated for use up to 100 °C.

Can I remove it for greasing?

Yes. Pull it straight out and press it back in after servicing.

Need a price for ECB 505/D?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
ECB 505/D Price on application
Get a quote

Quote for ECB 505/D

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Speed, load, temperature, mounting arrangement and the designation you are replacing all help us answer in one pass.

We use your details only to answer this enquiry. See our privacy policy.