ECB 510-50M/D
A low-profile TPU end cap for size 10 ball bearing units. 105.3 mm open end, 34.5 mm deep, fitted by hand.
- Outside D
- 105.3 mm
- Width B
- 34.5 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECB 510-50M/D is a closed end cap for size 10 ball bearing units. It shuts off the exposed end of the shaft at the housing. That makes the machine safer to work around and keeps grit and spray away from the bearing.
A lower profile for size 10 units
This cover is 34.5 mm deep, about 5.5 mm shorter than the standard ECB 510. It suits layouts where a guard, frame member or pulley sits close to the housing. The open end measures 105.3 mm and it narrows to 87.6 mm at the closed end.
Material and dimensions
It is a single TPU (thermoplastic polyurethane) moulding. The slight give in the material lets it snap home by hand, and it stands up well to grease, oil and cleaning products. It is rated for temperatures up to 100 °C.
- Outside diameter at open end (D1): 105.3 mm
- Outside diameter at closed end (D): 87.6 mm
- Anchorage diameter (D2): 100.8 mm
- Overall width (A): 34.5 mm
- Weight: approx. 50 g
- Material: Thermoplastic polyurethane (TPU)
Fitting and removal
- Remove dirt and old grease from the housing bore.
- Offer the cover up square to the opening.
- Push it home by hand until the rim lies flat against the housing.
It can be pulled out and refitted whenever the bearing needs attention.
Before you order
Confirm the 105.3 mm housing opening and check that the shaft end and collar fit within 34.5 mm. Need more depth? Take a look at the ECB 510.
Where it is used
- Roller and belt conveyors
- Packaging and bottling lines
- Feed and grain equipment
- Air-handling and ventilation units
Key features
- Low 34.5 mm profile
- Fits size 10 units
- Hand push-in fit
- TPU resists grease, oil and cleaners
- Rated up to 100 °C
Typical applications
- Roller and belt conveyors
- Packaging and bottling lines
- Feed and grain equipment
- Air-handling and ventilation units
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 105.3 mm |
|---|---|
| Width (B) | 34.5 mm |
| Mass | 0.05 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Thermoplastic polyurethane (TPU) |
|---|
Identification
| Part number | ECB 510-50M/D |
|---|---|
| Manufacturer part number | ECB 510-50M/D |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECB 510-50M/D |
ECB 510-50M/D |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
Which units does ECB 510-50M/D fit?
Size 10 ball bearing units with a 105.3 mm housing opening.
How deep is it?
34.5 mm overall, which is shallower than the 40 mm ECB 510.
Does it need tools?
No. It presses in and pulls out by hand.
What is it made of?
One-piece TPU (thermoplastic polyurethane), rated up to 100 °C.
Need a price for ECB 510-50M/D?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
