ECB 506
An end cover for size 06 ball bearing units. 81.2 mm at the open end, 36 mm deep, and it fits by hand with no tools.
- Outside D
- 81.2 mm
- Width B
- 36 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECB 506 is an end cover for size 06 ball bearing units. It closes the open side of the housing and covers the shaft end that sticks out of it. Operators are kept away from the turning shaft, and the bearing is better protected from dust, chips and water.
Sized for size 06 units
This cover has an 81.2 mm open end and 36 mm of depth, which leaves enough room for the shaft end and locking collar on the larger size 06 housings. It narrows to 59 mm at the closed face.
Material and dimensions
It is made in one piece from TPU, a tough plastic that bends slightly so it can be pressed in by hand and then holds firm. It tolerates grease, oil and cleaning chemicals and can be used up to 100 °C.
- Outside diameter at open end (D1): 81.2 mm
- Outside diameter at closed end (D): 59 mm
- Anchorage diameter (D2): 76.9 mm
- Overall width (A): 36 mm
- Weight: approx. 20 g
- Material: TPU
Fitting and removal
- Clean dirt and old lubricant out of the housing opening.
- Offer the cover up square to the bore.
- Press evenly around the rim until it is seated flush.
Pull it straight out for greasing or inspection. If the rim is undamaged, it can be fitted again.
Before you order
Check that the housing opening is 81.2 mm and that the shaft end and collar fit inside the 36 mm depth. If you are not sure, send us the bearing unit number and we will confirm the fit.
Where it is used
- Heavy conveyors and bucket elevators
- Agricultural and grain equipment
- Mixers and processing machines
- Large fans and blowers
- Material handling equipment
Key features
- 36 mm depth for size 06 shaft ends
- Push-in fit, no tools
- TPU handles grease, oil and cleaners
- Rated up to 100 °C
- Can be removed and refitted
Typical applications
- Heavy conveyors and bucket elevators
- Agricultural and grain equipment
- Mixers and processing machines
- Large fans and blowers
- Material handling equipment
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 81.2 mm |
|---|---|
| Width (B) | 36 mm |
| Mass | 0.02 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Thermoplastic polyurethane (TPU) |
|---|
Identification
| Part number | ECB 506 |
|---|---|
| Manufacturer part number | ECB 506 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECB 506 |
ECB 506 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What size bearing unit does the ECB 506 fit?
Size 06 ball bearing units with an 81.2 mm housing opening.
How deep is the cover?
It is 36 mm deep overall, enough for the shaft end and locking collar on most size 06 units.
Is it difficult to install?
No. Press it in by hand until the rim sits flush with the housing.
What is it made from?
One-piece TPU, rated for use up to 100 °C.
Can it be reused?
Yes. It can be pulled out for maintenance and pushed back in.
Need a price for ECB 506?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
