ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
12.7 × 32.9 mm

Flanged ball bearing units

F2B 008-TF

Oval 2-bolt cast iron flanged ball bearing unit for 1/2 in shafts, with set screw locking and seals plus flingers on both sides.

Bore d
12.7 mm
Width B
32.9 mm
Dynamic C
9.56 kN
Static C₀
4.75 kN
Limiting speed
9,500 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 008-TF is a two-bolt oval flanged ball bearing unit for 1/2 in (12.7 mm) shafts. It pairs a cast iron housing with a sealed insert bearing, so you can bolt it straight onto a machine wall or frame and have a ready-to-run bearing position. It is made to North American inch standards.

Set screw locking on an extended inner ring

The YAR 203-008-2F insert has an extended inner ring that is fixed to the shaft with two set screws. This is a quick, simple way to lock the bearing, and it works whether the shaft turns in one direction or switches back and forth. Each side has a contact seal and a flinger, which helps in dusty or dirty conditions.

Specifications

  • Shaft diameter (d): 1/2 in (12.7 mm)
  • Bolt hole centres (J): 76.2 mm
  • Overall height (H): 98.4 mm
  • Overall length (L): 60.3 mm
  • Housing width (A): 24 mm
  • Overall width (T): 32.9 mm
  • Inner ring width (B1): 27.4 mm
  • Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
  • Basic dynamic load rating (C): 9.56 kN
  • Basic static load rating (C0): 4.75 kN
  • Fatigue load limit (Pu): 0.2 kN
  • Limiting speed: 9 500 r/min (h6 shaft)
  • Insert bearing: YAR 203-008-2F (extended inner ring, set screw locking)
  • Locking: Two #10-32 UNF set screws, tightened to about 4 N·m
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.382 kg

Mounting tips

  1. Slide the unit onto a clean, burr-free shaft.
  2. Bolt the flange to the frame through both holes with 3/8 in or M10 bolts.
  3. Line the shaft up, then tighten both set screws to about 4 N·m.
  4. Add grease through the fitting as part of routine maintenance.

Like other ball bearing units, it can take up a small amount of initial misalignment, but it is not designed to let the shaft move axially.

Typical applications

  • Conveyors and material handling
  • Packaging machinery
  • Light agricultural equipment
  • General machine frames

Key features

  • Oval 2-bolt cast iron flange
  • Fits 1/2 in (12.7 mm) shafts
  • Set screw locking
  • Seal and flinger on both sides
  • Grease fitting for relubrication

Typical applications

  • Conveyors and material handling
  • Packaging machinery
  • Light agricultural equipment
  • General machine frames

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 008-TF
Bore diameter (d) 12.7 mm
Width (B) 32.9 mm
Mass 0.382 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 008-TF
Basic dynamic load rating (C) 9.56 kN
Basic static load rating (C₀) 4.75 kN
Fatigue load limit (Pu) 0.2 kN
Limiting speed 9500 r/min

Design and execution

Design & execution for F2B 008-TF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 008-TF
Part number F2B 008-TF
Manufacturer part number F2B 008-TF
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 008-TF
Manufacturer Their designation Our equivalent
SKF F2B 008-TF F2B 008-TF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft size does F2B 008-TF fit?

A 1/2 in (12.7 mm) shaft.

What bolts do I need?

Two 3/8 in or M10 bolts, on 76.2 mm centres.

How is it locked to the shaft?

With two set screws in the extended inner ring, tightened to about 4 N·m.

Can it be regreased?

Yes. The housing has a grease fitting.

Need a price for F2B 008-TF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 008-TF Price on application
Get a quote

Quote for F2B 008-TF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.