ECL 207
A polypropylene end cover for 207-size ball bearing units. 74.6 mm open end, 32 mm deep, push-in fit.
- Outside D
- 74.6 mm
- Width B
- 32 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECL 207 is an end cover for 207-size ball bearing units. It fits into the housing at the free end of the shaft and covers it completely, keeping the moving shaft out of reach and helping to keep contamination away from the bearing.
Light and chemical-resistant
Made from polypropylene (PP), the ECL 207 weighs only about 13 g. Most chemicals do not affect it, and it is rated for temperatures up to 100 °C.
Dimensions
Depth is 32 mm overall. The open end measures 74.6 mm, the closed end 63.3 mm and the anchorage diameter 75.4 mm.
- Outside diameter at open end (D1): 74.6 mm
- Outside diameter at closed end (D): 63.3 mm
- Anchorage diameter (D2): 75.4 mm
- Overall width (A): 32 mm
- Weight: approx. 13 g
- Material: Polypropylene (PP)
Fitting and removal
- Clean the bore of the housing.
- Place the cover over the opening, square to the shaft.
- Press it in by hand until it seats fully.
It comes out with a straight pull and can be refitted after servicing.
Before you order
Check for a 74.6 mm housing opening and enough room for the shaft end within 32 mm. Tell us the unit designation and we will confirm the fit.
Where it is used
- Bulk handling conveyors
- Printing and paper machines
- Crop processing equipment
- Fans and air movers
Key features
- PP body, about 13 g
- Fits 207-size units
- Fits by hand
- Resists most chemicals
- Rated up to 100 °C
Typical applications
- Bulk handling conveyors
- Printing and paper machines
- Crop processing equipment
- Fans and air movers
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 74.6 mm |
|---|---|
| Width (B) | 32 mm |
| Mass | 0.013 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECL 207 |
|---|---|
| Manufacturer part number | ECL 207 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECL 207 |
ECL 207 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What is ECL 207 for?
207-size ball bearing units with a 74.6 mm housing opening.
How deep is it?
32 mm overall.
Can it be refitted?
Yes. It pulls out and presses back in.
What material is it?
Polypropylene (PP), for use up to 100 °C.
Need a price for ECL 207?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
