ECY 208
A low-profile PP end cap for 208-size ball bearing units. 83 mm open end, 28.5 mm deep.
- Outside D
- 83 mm
- Width B
- 28.5 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECY 208 is a plastic cap for the shaft end of 208-size ball bearing units. It keeps the rotating shaft enclosed and helps stop dust, chips and water from reaching the bearing.
Low-profile cover for 208 units
At 28.5 mm deep, ECY 208 sits closer to the housing than the ECW 208 (36 mm) and the ECL 208 (37 mm). It is 83 mm across the open end and 76.5 mm across the closed end.
Material and dimensions
The cover is moulded polypropylene (PP), about 21 g. It is light, firm and resistant to most chemicals, with a temperature rating of up to 100 °C.
- Outside diameter at open end (D1): 83 mm
- Outside diameter at closed end (D): 76.5 mm
- Anchorage diameter (D2): 84.5 mm
- Overall width (A): 28.5 mm
- Weight: approx. 21 g
- Material: Polypropylene (PP)
Fitting and removal
- Clean out the housing opening.
- Line the cover up with the bore.
- Push it in by hand until the rim is tight against the housing.
To grease or inspect the bearing, pull it straight out.
Before you order
Make sure the housing has an 83 mm opening and that the shaft end fits within 28.5 mm.
Where it is used
- Medium-duty conveyors
- Timber processing lines
- Grain machinery
- Industrial fans
Key features
- Low 28.5 mm profile
- Fits 208-size units
- PP, about 21 g
- Push-in, no tools
- Rated up to 100 °C
Typical applications
- Medium-duty conveyors
- Timber processing lines
- Grain machinery
- Industrial fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 83 mm |
|---|---|
| Width (B) | 28.5 mm |
| Mass | 0.0212 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECY 208 |
|---|---|
| Manufacturer part number | ECY 208 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECY 208 |
ECY 208 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does ECY 208 fit?
208-size ball bearing units with an 83 mm housing opening.
Which 208 cover is the shallowest?
ECY 208, at 28.5 mm deep.
Is it easy to remove?
Yes. A straight pull takes it out.
What material is it?
Polypropylene (PP), rated up to 100 °C.
Need a price for ECY 208?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
