ECB 507
A full-depth end cover for size 07 ball bearing units. 91.1 mm at the open end, 36.5 mm deep, made from one-piece TPU.
- Outside D
- 91.1 mm
- Width B
- 36.5 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECB 507 is the standard end cover for size 07 ball bearing units. It fits into the open side of the housing and closes over the shaft end, so the rotating shaft is out of reach and the bearing is protected from dust, chips and water.
Full depth for size 07 housings
With 36.5 mm of depth, the ECB 507 has room for the shaft end and locking collar found on most size 07 units. The rim measures 91.1 mm and the cover narrows to 64.5 mm at the closed face. If the space in front of the housing is limited, look at the 29 mm deep ECB 507/D.
Material and dimensions
The body is moulded in one piece from TPU. It holds its shape well, grips the housing without screws and is unaffected by the greases, oils and cleaning products found in most plants. It is rated up to 100 °C.
- Outside diameter at open end (D1): 91.1 mm
- Outside diameter at closed end (D): 64.5 mm
- Anchorage diameter (D2): 86.8 mm
- Overall width (A): 36.5 mm
- Weight: approx. 20 g
- Material: TPU
Fitting and removal
- Wipe the housing opening clean.
- Line the cover up with the bore.
- Press it in firmly and evenly until the rim is flush.
When the bearing needs attention, pull the cover straight off. Once the work is done it can be pushed back into place.
Before you order
Make sure the housing opening is 91.1 mm and that the shaft end, collar and set screws fit within 36.5 mm. Send us the bearing unit number if you would like us to double-check.
Where it is used
- Heavy-duty conveyors and elevators
- Farm and harvesting machinery
- Mixers and process equipment
- Industrial fans
- Saw mills and woodworking machines
Key features
- 36.5 mm depth for longer shaft ends
- Push-in fit, no tools needed
- TPU withstands grease, oil and cleaners
- Rated up to 100 °C
- Removable for maintenance
Typical applications
- Heavy-duty conveyors and elevators
- Farm and harvesting machinery
- Mixers and process equipment
- Industrial fans
- Saw mills and woodworking machines
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 91.1 mm |
|---|---|
| Width (B) | 36.5 mm |
| Mass | 0.02 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Thermoplastic polyurethane (TPU) |
|---|
Identification
| Part number | ECB 507 |
|---|---|
| Manufacturer part number | ECB 507 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECB 507 |
ECB 507 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What size unit does the ECB 507 fit?
Size 07 ball bearing units with a 91.1 mm housing opening.
How deep is it?
It is 36.5 mm deep overall.
Is there a shorter version?
Yes. The ECB 507/D and ECB 507-35M/D are both 29 mm deep.
How do I install it?
Press it into the clean housing opening by hand until the rim is flush.
Can it be reused?
Yes. It can be pulled out for greasing and refitted.
Need a price for ECB 507?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
