ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
88 × 29 mm

Bearing end covers

ECY 209

A polypropylene end cap for 209-size ball bearing units. 88 mm open end, 29 mm deep.

Outside D
88 mm
Width B
29 mm
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

ECY 209 is an end cover for 209-size ball bearing units. It plugs the open side of the housing and covers the shaft tip, making the drive safer and keeping grit away from the bearing seal.

Made for 209 housings

This cover is 29 mm deep. It is 88 mm across the open end and 81.4 mm across the closed end, with an 89.5 mm anchorage diameter that holds it in the bore.

Material and dimensions

It is moulded in polypropylene (PP) and weighs about 23 g. PP is light and stiff, resists most chemicals and is rated for use up to 100 °C.

  • Outside diameter at open end (D1): 88 mm
  • Outside diameter at closed end (D): 81.4 mm
  • Anchorage diameter (D2): 89.5 mm
  • Overall width (A): 29 mm
  • Weight: approx. 23 g
  • Material: Polypropylene (PP)

Fitting and removal

  1. Remove old grease and dirt from the housing opening.
  2. Offer the cover up square to the bore.
  3. Press it home by hand until it sits flat.

It can be pulled out and refitted whenever the bearing needs attention.

Before you order

Confirm your housing has an 88 mm opening and that the shaft end and collar fit within 29 mm. Send us the unit number if you would like us to check.

Where it is used

  • Belt conveyors
  • Mixers and blenders
  • Farm and grain machinery
  • Air-handling units

Key features

  • 29 mm depth
  • Fits 209-size units
  • PP, about 23 g
  • Hand push-in fit
  • Rated up to 100 °C

Typical applications

  • Belt conveyors
  • Mixers and blenders
  • Farm and grain machinery
  • Air-handling units

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for ECY 209
Outside diameter (D) 88 mm
Width (B) 29 mm
Mass 0.023 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for ECY 209
Operating temperature range Up to +100 °C

Design and execution

Design & execution for ECY 209
Ring & ball material Polypropylene (PP)

Identification

Identification for ECY 209
Part number ECY 209
Manufacturer part number ECY 209

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for ECY 209
Manufacturer Their designation Our equivalent
SKF ECY 209 ECY 209

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What unit does ECY 209 fit?

209-size ball bearing units with an 88 mm housing opening.

How deep is it?

29 mm overall.

Does it need tools?

No. It presses in and pulls out by hand.

What temperature can it take?

Up to 100 °C.

Need a price for ECY 209?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
ECY 209 Price on application
Get a quote

Quote for ECY 209

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.