ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
81.2 × 31 mm

Bearing end covers

ECB 506/D

Short-body end cover for size 06 ball bearing units, with an 81.2 mm rim and 31 mm overall width. One-piece TPU, push-in fit.

Outside D
81.2 mm
Width B
31 mm
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

ECB 506/D is the shorter of our size 06 end covers. It seals the open side of the bearing unit housing and covers the protruding shaft, which protects people working nearby and keeps dirt and moisture off the bearing.

When to use the /D version

Pick the ECB 506/D when a full-depth cover would touch something in front of the housing. It stands 31 mm proud of the housing face, against 36 mm for the ECB 506, and tapers from the 81.2 mm rim to 63.8 mm at the closed end.

Material and dimensions

Made from TPU in a single piece, the cover is tough but slightly springy, so it locks into the housing with hand pressure. It copes with grease, oil and the detergents used on wash-down lines and is rated to 100 °C.

  • Outside diameter at open end (D1): 81.2 mm
  • Outside diameter at closed end (D): 63.8 mm
  • Anchorage diameter (D2): 76.7 mm
  • Overall width (A): 31 mm
  • Weight: approx. 30 g
  • Material: TPU

Fitting and removal

  1. Remove old grease and dirt from the housing bore.
  2. Place the cover square to the opening.
  3. Press evenly round the rim until it sits tight against the housing.

For greasing or a bearing check, the cover pulls out straight and pushes back in when you are done.

Before you order

Check that the housing opening measures 81.2 mm and that nothing on the shaft side extends more than 31 mm. If it does, use the standard ECB 506. We can check the fit for you if you send the unit number.

Where it is used

  • Food processing and packaging lines
  • Roller conveyors
  • Agricultural machinery
  • Ventilation equipment
  • Compact size 06 installations

Key features

  • 31 mm deep for limited space
  • Hand-fitted, no tools
  • Resists oil, grease and detergents
  • Usable up to 100 °C
  • Reusable after servicing

Typical applications

  • Food processing and packaging lines
  • Roller conveyors
  • Agricultural machinery
  • Ventilation equipment
  • Compact size 06 installations

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for ECB 506/D
Outside diameter (D) 81.2 mm
Width (B) 31 mm
Mass 0.03 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for ECB 506/D
Operating temperature range Up to +100 °C

Design and execution

Design & execution for ECB 506/D
Ring & ball material Thermoplastic polyurethane (TPU)

Identification

Identification for ECB 506/D
Part number ECB 506/D
Manufacturer part number ECB 506/D

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for ECB 506/D
Manufacturer Their designation Our equivalent
SKF ECB 506/D ECB 506/D

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What is the ECB 506/D for?

It is an end cover for size 06 ball bearing units with an 81.2 mm housing opening.

Why choose it over the standard ECB 506?

It is 31 mm deep rather than 36 mm, so it fits where space in front of the housing is tight.

How is it fitted?

Clean the opening, hold the cover square and press it in by hand.

What material is it?

One-piece thermoplastic polyurethane (TPU).

Can it be taken off for maintenance?

Yes. Pull it straight out and press it back in afterwards.

Need a price for ECB 506/D?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
ECB 506/D Price on application
Get a quote

Quote for ECB 506/D

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Speed, load, temperature, mounting arrangement and the designation you are replacing all help us answer in one pass.

We use your details only to answer this enquiry. See our privacy policy.