F2B 008-RM
Compact oval 2-bolt flanged ball bearing unit for 1/2 in shafts, with a narrow inner ring insert and set screw locking.
- Bore d
- 12.7 mm
- Width B
- 32.9 mm
- Dynamic C
- 9.56 kN
- Static C₀
- 4.75 kN
- Limiting speed
- 9,500 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 008-RM is a compact oval flanged ball bearing unit for 1/2 in (12.7 mm) shafts. The two-bolt cast iron housing carries a sealed insert bearing with a narrow inner ring, which keeps the unit short along the shaft. It follows North American inch standards.
Narrow inner ring, set screw locking
Its YAT 203-008 insert is 22.1 mm wide across the inner ring, narrower than the 27.4 mm extended ring on the F2B 008-TF. Set screws lock it to the shaft, and contact seals on both sides keep grease in and dirt out.
Specifications
- Shaft diameter (d): 1/2 in (12.7 mm)
- Bolt hole centres (J): 76.2 mm
- Overall height (H): 98.4 mm
- Overall length (L): 60.3 mm
- Housing width (A): 24 mm
- Overall width (T): 32.9 mm
- Inner ring width (B1): 22.1 mm
- Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
- Basic dynamic load rating (C): 9.56 kN
- Basic static load rating (C0): 4.75 kN
- Fatigue load limit (Pu): 0.2 kN
- Limiting speed: 9 500 r/min (h6 shaft)
- Insert bearing: YAT 203-008 (narrow inner ring, set screw locking)
- Locking: Set screws (#10-32 UNF), tightened to about 4 N·m
- Sealing: Contact seal on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.363 kg
Mounting tips
- Clean the shaft and check it for burrs.
- Slide the unit on and bolt the flange in place with 3/8 in or M10 bolts.
- Tighten the set screws to about 4 N·m once the shaft is aligned.
- Top up the grease through the fitting during routine checks.
Typical applications
- Light conveyors
- Material handling equipment
- Packaging and processing machines
- Frames with little room along the shaft
Key features
- Narrow 22.1 mm inner ring
- Fits 1/2 in (12.7 mm) shafts
- Set screw locking
- Sealed on both sides
- Oval 2-bolt cast iron flange
Typical applications
- Light conveyors
- Material handling equipment
- Packaging and processing machines
- Frames with little room along the shaft
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 12.7 mm |
|---|---|
| Width (B) | 32.9 mm |
| Mass | 0.363 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 9.56 kN |
|---|---|
| Basic static load rating (C₀) | 4.75 kN |
| Fatigue load limit (Pu) | 0.2 kN |
| Limiting speed | 9500 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 008-RM |
|---|---|
| Manufacturer part number | F2B 008-RM |
| Conforms to standard | North American (inch) |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 008-RM |
F2B 008-RM |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
How is F2B 008-RM different from F2B 008-TF?
It uses a narrow inner ring insert (22.1 mm wide) instead of an extended one (27.4 mm), so it takes up less space along the shaft.
What shaft size does it fit?
A 1/2 in (12.7 mm) shaft.
How is it locked?
With set screws in the inner ring, tightened to about 4 N·m.
Is it sealed?
Yes. There is a contact seal on each side.
Need a price for F2B 008-RM?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
