ECY 214
A polypropylene end cover for 214-size ball bearing units. 131 mm open end, 45 mm deep.
- Outside D
- 131 mm
- Width B
- 45 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECY 214 is an end cover for 214-size ball bearing units. It closes the housing over the free shaft end, keeping the turning shaft enclosed and giving the bearing extra protection against dust and wash water.
Sized for heavy-duty units
The cover measures 131 mm across the open end and 121.4 mm across the closed end, with 45 mm of depth for the shaft end and collar. The 133 mm anchorage diameter is the part that holds it in the housing.
Material and dimensions
It is moulded from polypropylene (PP) and weighs about 72 g. PP is light for a cover this size, resists most chemicals and is rated for temperatures up to 100 °C.
- Outside diameter at open end (D1): 131 mm
- Outside diameter at closed end (D): 121.4 mm
- Anchorage diameter (D2): 133 mm
- Overall width (A): 45 mm
- Weight: approx. 72 g
- Material: Polypropylene (PP)
Fitting and removal
- Clean old grease and grit out of the housing bore.
- Hold the cover square to the opening.
- Press around the rim by hand until it is fully seated.
Pull it straight out for maintenance, then fit it again.
Before you order
Check for a 131 mm housing opening and confirm the shaft end fits within 45 mm. Send us the unit number and we will confirm the match.
Where it is used
- Heavy belt conveyors
- Bucket elevators
- Cement and aggregate plant
- Large industrial fans
Key features
- 45 mm depth
- Fits 214-size units
- PP, about 72 g
- Push-in, no tools
- Rated up to 100 °C
Typical applications
- Heavy belt conveyors
- Bucket elevators
- Cement and aggregate plant
- Large industrial fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 131 mm |
|---|---|
| Width (B) | 45 mm |
| Mass | 0.072 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECY 214 |
|---|---|
| Manufacturer part number | ECY 214 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECY 214 |
ECY 214 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does ECY 214 fit?
214-size ball bearing units with a 131 mm housing opening.
How deep is it?
45 mm overall.
What is it made of?
Polypropylene (PP), rated up to 100 °C.
Does it need tools?
No. It presses in and pulls out by hand.
Need a price for ECY 214?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
