ECW 206
A deep PP end cap for 206-size ball bearing units. 64.4 mm open end, 33.5 mm deep.
- Outside D
- 64.4 mm
- Width B
- 33.5 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECW 206 is a push-in end cover for 206-size ball bearing units. It caps the shaft where it leaves the housing, so there is no turning part left in the open, and less dust reaches the bearing.
Extra depth for 206 units
This is a deep cover at 33.5 mm, 8.5 mm more than the ECY 206. It suits shafts that run past the locking collar. Across the open end it measures 64.4 mm, tapering to 54.1 mm at the closed end.
Material and dimensions
It is moulded from polypropylene (PP), weighs about 20 g and resists most chemicals used in plants and workshops. It is rated for temperatures up to 100 °C.
- Outside diameter at open end (D1): 64.4 mm
- Outside diameter at closed end (D): 54.1 mm
- Anchorage diameter (D2): 66 mm
- Overall width (A): 33.5 mm
- Weight: approx. 20 g
- Material: Polypropylene (PP)
Fitting and removal
- Clear old grease and dirt from the housing opening.
- Seat the cover squarely in the bore.
- Press around the rim by hand until it is fully in.
Pull it out when the bearing needs a check, then push it back.
Before you order
Make sure the housing opening is 64.4 mm and that the shaft end fits within 33.5 mm.
Where it is used
- Food and beverage conveyors
- Woodworking machinery
- Grain handling equipment
- Exhaust fans
Key features
- Deep 33.5 mm body
- Fits 206-size units
- PP, about 20 g
- Push-in, no tools
- Rated up to 100 °C
Typical applications
- Food and beverage conveyors
- Woodworking machinery
- Grain handling equipment
- Exhaust fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 64.4 mm |
|---|---|
| Width (B) | 33.5 mm |
| Mass | 0.02 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECW 206 |
|---|---|
| Manufacturer part number | ECW 206 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECW 206 |
ECW 206 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does ECW 206 fit?
206-size ball bearing units with a 64.4 mm housing opening.
How deep is it?
33.5 mm overall, compared with 25 mm for ECY 206.
Can it be reused?
Yes. It pulls out and presses back in.
What is it made of?
Polypropylene (PP), for use up to 100 °C.
Need a price for ECW 206?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
