ECY 215
A polypropylene end cap for 215-size ball bearing units. 136 mm open end, 45 mm deep.
- Outside D
- 136 mm
- Width B
- 45 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECY 215 caps the shaft end on 215-size ball bearing units. Fitted into the open side of the housing, it keeps people clear of the rotating shaft and helps stop dirt and moisture from reaching the bearing seal.
Same depth as ECY 214, wider opening
ECY 215 shares the 45 mm depth of the ECY 214 but is 5 mm larger across, at 136 mm on the open end and 126.4 mm on the closed end. Its anchorage diameter is 138 mm.
Material and dimensions
The cover is a one-piece polypropylene (PP) moulding of about 77 g. It holds its shape, handles most industrial chemicals and is rated for use up to 100 °C.
- Outside diameter at open end (D1): 136 mm
- Outside diameter at closed end (D): 126.4 mm
- Anchorage diameter (D2): 138 mm
- Overall width (A): 45 mm
- Weight: approx. 77 g
- Material: Polypropylene (PP)
Fitting and removal
- Wipe the housing opening clean.
- Start one side of the cover in the bore.
- Work round with firm hand pressure until the rim sits flush.
It comes out with a straight pull when the bearing needs servicing.
Before you order
Measure the housing opening (136 mm) and check that the shaft end fits within 45 mm.
Where it is used
- Bulk handling conveyors
- Mixers and screens
- Sawmill equipment
- Process fans
Key features
- 45 mm depth
- Fits 215-size units
- PP, about 77 g
- Fits by hand
- Rated up to 100 °C
Typical applications
- Bulk handling conveyors
- Mixers and screens
- Sawmill equipment
- Process fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 136 mm |
|---|---|
| Width (B) | 45 mm |
| Mass | 0.077 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECY 215 |
|---|---|
| Manufacturer part number | ECY 215 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECY 215 |
ECY 215 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What unit is ECY 215 for?
215-size ball bearing units with a 136 mm housing opening.
How is it different from ECY 214?
Both are 45 mm deep. ECY 215 is larger across, with a 136 mm open end instead of 131 mm.
Can it be refitted?
Yes. It pulls out and presses back in.
What temperature can it take?
Up to 100 °C.
Need a price for ECY 215?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
