ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
12.7 × 39.1 mm

Flanged ball bearing units

F2B 008-FM

Oval 2-bolt cast iron flanged ball bearing unit for 1/2 in shafts, with an eccentric locking collar.

Bore d
12.7 mm
Width B
39.1 mm
Dynamic C
9.56 kN
Static C₀
4.75 kN
Limiting speed
9,500 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 008-FM is an oval two-bolt flanged ball bearing unit with eccentric collar locking, made for 1/2 in (12.7 mm) shafts. It has a cast iron housing and a sealed insert bearing, built to North American inch standards.

Eccentric locking collar

Instead of set screws in the inner ring, the YET 203-008 insert is held by an eccentric collar. You turn the collar in the direction of shaft rotation until it grips, then secure it with its own set screw. This locking method is a good match for shafts that run in one direction.

Specifications

  • Shaft diameter (d): 1/2 in (12.7 mm)
  • Bolt hole centres (J): 76.2 mm
  • Overall height (H): 98.4 mm
  • Overall length (L): 60.3 mm
  • Housing width (A): 24 mm
  • Overall width (T): 39.1 mm
  • Inner ring width (B1): 28.6 mm
  • Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
  • Basic dynamic load rating (C): 9.56 kN
  • Basic static load rating (C0): 4.75 kN
  • Fatigue load limit (Pu): 0.2 kN
  • Limiting speed: 9 500 r/min (h6 shaft)
  • Insert bearing: YET 203-008 (narrow inner ring, eccentric locking collar)
  • Locking: Eccentric collar with a 1/4-28 UNF set screw, tightened to about 4 N·m
  • Sealing: Contact seal on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.395 kg

Mounting tips

  1. Slide the unit onto the shaft and bolt the flange in place.
  2. Push the collar onto the inner ring and turn it in the direction of rotation until it locks.
  3. Tighten the collar set screw to about 4 N·m.
  4. Regrease through the fitting as needed.

Typical applications

  • Belt and roller conveyors
  • Agricultural machinery
  • Material handling equipment
  • Drives that turn in one direction

Key features

  • Eccentric locking collar
  • Fits 1/2 in (12.7 mm) shafts
  • Sealed on both sides
  • Oval 2-bolt cast iron flange
  • Grease fitting for relubrication

Typical applications

  • Belt and roller conveyors
  • Agricultural machinery
  • Material handling equipment
  • Drives that turn in one direction

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 008-FM
Bore diameter (d) 12.7 mm
Width (B) 39.1 mm
Mass 0.395 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 008-FM
Basic dynamic load rating (C) 9.56 kN
Basic static load rating (C₀) 4.75 kN
Fatigue load limit (Pu) 0.2 kN
Limiting speed 9500 r/min

Design and execution

Design & execution for F2B 008-FM
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 008-FM
Part number F2B 008-FM
Manufacturer part number F2B 008-FM
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 008-FM
Manufacturer Their designation Our equivalent
SKF F2B 008-FM F2B 008-FM

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

How is F2B 008-FM locked to the shaft?

With an eccentric collar. Turn it in the direction of rotation until it grips, then tighten its set screw to about 4 N·m.

What shaft size does it fit?

A 1/2 in (12.7 mm) shaft.

What is the overall width?

39.1 mm, including the locking collar.

What bolts does it need?

Two 3/8 in or M10 bolts on 76.2 mm centres.

Need a price for F2B 008-FM?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 008-FM Price on application
Get a quote

Quote for F2B 008-FM

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.