ECY 218
A large polypropylene end cover for 218-size ball bearing units. 168 mm open end, 49 mm deep.
- Outside D
- 168 mm
- Width B
- 49 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECY 218 is a large push-in cover for 218-size ball bearing units. It encloses the shaft end at the housing, making the drive safer to work around and adding a barrier against dust, chips and spray.
For big shafts and housings
At 168 mm across the open end and 49 mm deep, this cover suits the large units found on heavy conveyors and process equipment. The closed end is 156.6 mm and the anchorage diameter is 170 mm.
Material and dimensions
It is moulded from polypropylene (PP) and weighs about 90 g. The material is light, rigid and resistant to most chemicals, with a temperature rating of up to 100 °C.
- Outside diameter at open end (D1): 168 mm
- Outside diameter at closed end (D): 156.6 mm
- Anchorage diameter (D2): 170 mm
- Overall width (A): 49 mm
- Weight: approx. 90 g
- Material: Polypropylene (PP)
Fitting and removal
- Clean out the housing bore.
- Line the cover up with the opening.
- Press it in evenly with both hands until fully seated.
To grease or inspect the bearing, pull the cover straight out.
Before you order
Confirm the 168 mm housing opening and check that the shaft end and collar fit inside 49 mm.
Where it is used
- Heavy conveyors
- Quarry and aggregate plant
- Pulp and paper machinery
- Large ventilation fans
Key features
- 49 mm depth
- Fits 218-size units
- PP, about 90 g
- Push-in, no tools
- Rated up to 100 °C
Typical applications
- Heavy conveyors
- Quarry and aggregate plant
- Pulp and paper machinery
- Large ventilation fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 168 mm |
|---|---|
| Width (B) | 49 mm |
| Mass | 0.09 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECY 218 |
|---|---|
| Manufacturer part number | ECY 218 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECY 218 |
ECY 218 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does ECY 218 fit?
218-size ball bearing units with a 168 mm housing opening.
How deep is it?
49 mm overall.
Is it easy to remove?
Yes. A straight pull takes it out.
What material is it?
Polypropylene (PP), rated up to 100 °C.
Need a price for ECY 218?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
