ECY 206
A compact PP end cap for 206-size ball bearing units. 65 mm open end, 25 mm deep, fitted by hand.
- Outside D
- 65 mm
- Width B
- 25 mm
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
ECY 206 closes off the shaft end on 206-size ball bearing units. Once fitted it covers the rotating shaft tip, lowers the risk of snagging and gives the bearing an extra layer of protection from dust and spray.
Compact cover for 206 units
ECY 206 is 25 mm deep, shallower than the ECL 206 and ECW 206. The open end measures 65 mm and it narrows to 59.4 mm at the closed end. If the shaft runs further out, the 33.5 mm ECW 206 is the one to choose.
Material and dimensions
It is a polypropylene (PP) moulding of about 13 g. PP stays rigid, takes up very little moisture and handles most chemicals. It is rated for temperatures up to 100 °C.
- Outside diameter at open end (D1): 65 mm
- Outside diameter at closed end (D): 59.4 mm
- Anchorage diameter (D2): 66.5 mm
- Overall width (A): 25 mm
- Weight: approx. 13 g
- Material: Polypropylene (PP)
Fitting and removal
- Clear grease and grit from the housing opening.
- Seat the cover squarely in the bore.
- Press around the edge by hand until it locks in.
Pull it free when you need to check the bearing and push it back afterwards.
Before you order
Your housing opening should be 65 mm, and the shaft end must fit within 25 mm.
Where it is used
- Food processing conveyors
- Woodworking machines
- Garden machinery
- Supply fans
Key features
- Compact 25 mm depth
- Fits 206-size units
- PP, about 13 g
- Push-in, no tools
- Rated up to 100 °C
Typical applications
- Food processing conveyors
- Woodworking machines
- Garden machinery
- Supply fans
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Outside diameter (D) | 65 mm |
|---|---|
| Width (B) | 25 mm |
| Mass | 0.0126 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Operating temperature range | Up to +100 °C |
|---|
Design and execution
| Ring & ball material | Polypropylene (PP) |
|---|
Identification
| Part number | ECY 206 |
|---|---|
| Manufacturer part number | ECY 206 |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | ECY 206 |
ECY 206 |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What does ECY 206 fit?
206-size ball bearing units with a 65 mm housing opening.
How deep is it?
25 mm overall.
Does it need screws?
No. It presses in by hand.
What is it made of?
Polypropylene (PP), rated up to 100 °C.
Need a price for ECY 206?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
