F2B 010-RM
Space-saving oval flanged ball bearing unit for 5/8 in shafts. Narrow inner ring insert, set screw locking, cast iron housing.
- Bore d
- 15.875 mm
- Width B
- 32.9 mm
- Dynamic C
- 9.56 kN
- Static C₀
- 4.75 kN
- Limiting speed
- 9,500 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 010-RM is a two-bolt oval flanged ball bearing unit for 5/8 in (15.875 mm) shafts. Its cast iron housing holds a sealed insert with a narrow inner ring, making it the most compact and lightest of our 010 flange units. It is built to North American inch standards.
Short along the shaft
The YAT 203-010 insert has a 22.1 mm inner ring and is fixed with set screws. Compared with the extended-ring F2B 010-TF, it leaves more free shaft length beside the housing for pulleys, sprockets or collars.
Specifications
- Shaft diameter (d): 5/8 in (15.875 mm)
- Bolt hole centres (J): 76.2 mm
- Overall height (H): 98.4 mm
- Overall length (L): 60.3 mm
- Housing width (A): 24 mm
- Overall width (T): 32.9 mm
- Inner ring width (B1): 22.1 mm
- Bolt holes (N): 11.11 mm, for 3/8 in or M10 bolts
- Basic dynamic load rating (C): 9.56 kN
- Basic static load rating (C0): 4.75 kN
- Fatigue load limit (Pu): 0.2 kN
- Limiting speed: 9 500 r/min (h6 shaft)
- Insert bearing: YAT 203-010 (narrow inner ring, set screw locking)
- Locking: Set screws (#10-32 UNF), tightened to about 4 N·m
- Sealing: Contact seal on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.35 kg
Mounting tips
- Make sure the shaft is clean and smooth.
- Fit the unit and bolt the flange down with 3/8 in or M10 bolts.
- Align the shaft and tighten the set screws to about 4 N·m.
- Relubricate through the grease fitting when servicing the machine.
Typical applications
- Compact conveyors
- Packaging lines
- Light material handling
- Small machine frames
Key features
- Fits 5/8 in (15.875 mm) shafts
- Narrow inner ring, 22.1 mm
- Set screw locking
- Seals on both sides
- Lightest 010 version, about 0.35 kg
Typical applications
- Compact conveyors
- Packaging lines
- Light material handling
- Small machine frames
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 15.875 mm |
|---|---|
| Width (B) | 32.9 mm |
| Mass | 0.35 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 9.56 kN |
|---|---|
| Basic static load rating (C₀) | 4.75 kN |
| Fatigue load limit (Pu) | 0.2 kN |
| Limiting speed | 9500 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 010-RM |
|---|---|
| Manufacturer part number | F2B 010-RM |
| Conforms to standard | North American (inch) |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 010-RM |
F2B 010-RM |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft does F2B 010-RM fit?
A 5/8 in (15.875 mm) shaft.
Why choose the RM version?
Its narrow 22.1 mm inner ring keeps the unit short along the shaft, which helps where space is tight.
How is it locked?
With set screws in the inner ring, tightened to about 4 N·m.
How much does it weigh?
About 0.35 kg.
Need a price for F2B 010-RM?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
