ISO 9001 certified bearing manufacturer · Full size and load data on every part

Enquiry list Get a quote

Try

Search the way engineers do

  • 6205 A designation, suffix or competitor interchange reference
  • 25×52×15 Bore × outside diameter × width in mm takes you straight to bearings that fit
  • 25×52 Bore and outside diameter only, when the width is open
22.225 × 38.9 mm

Flanged ball bearing units

F2B 014-TF

Oval flange unit for 7/8 in shafts with an extended inner ring, set screws and flinger-protected seals.

Bore d
22.225 mm
Width B
38.9 mm
Dynamic C
14 kN
Static C₀
7.8 kN
Limiting speed
7,000 r/min
  • Ex-stock
Request a quote
  • ISO 9001, lot traceable
  • Vibration checked per lot
  • Certificate with every shipment

Overview

F2B 014-TF pairs a cast iron two-bolt oval housing with a sealed insert bearing for 7/8 in (22.225 mm) shafts. The extended inner ring and set screw locking make it a versatile unit for both constant and reversing drives.

Built for dirty conditions

The YAR 205-014-2F insert carries a flinger on each side, in front of the contact seal, which helps keep grit and dust out. Its 34.1 mm inner ring gives the set screws a firm seat on the shaft.

Specifications

  • Shaft diameter (d): 7/8 in (22.225 mm)
  • Bolt hole centres (J): 98.8 mm
  • Overall height (H): 123.8 mm
  • Overall length (L): 69.9 mm
  • Housing width (A): 29.6 mm
  • Overall width (T): 38.9 mm
  • Inner ring width (B1): 34.1 mm
  • Bolt holes (N): 12.7 mm, for 7/16 in bolts
  • Basic dynamic load rating (C): 14 kN
  • Basic static load rating (C0): 7.8 kN
  • Fatigue load limit (Pu): 0.335 kN
  • Limiting speed: 7 000 r/min (h6 shaft)
  • Insert bearing: YAR 205-014-2F (extended inner ring, set screw locking)
  • Locking: Set screws (1/4-28 UNF), about 4 N·m
  • Sealing: Contact seal and flinger on both sides
  • Housing: cast iron, oval 2-bolt flange, with grease fitting
  • Weight: approx. 0.603 kg

Mounting tips

  1. Clean the shaft and remove burrs.
  2. Bolt the unit to the frame with two 7/16 in bolts.
  3. Align the shaft and tighten the set screws to about 4 N·m.
  4. Relubricate through the grease fitting at set intervals.

Typical applications

  • Conveyors in dusty plants
  • Reversing drives
  • Agricultural machinery
  • Bulk handling equipment

Key features

  • Fits 7/8 in (22.225 mm) shafts
  • Extended 34.1 mm inner ring
  • Set screw locking
  • Flinger plus seal on both sides
  • Takes the ECY 205 end cover

Typical applications

  • Conveyors in dusty plants
  • Reversing drives
  • Agricultural machinery
  • Bulk handling equipment

Principal dimensions

Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.

Principal dimensions for F2B 014-TF
Bore diameter (d) 22.225 mm
Width (B) 38.9 mm
Mass 0.603 kg

Load ratings and speed

Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.

Load ratings & speed for F2B 014-TF
Basic dynamic load rating (C) 14 kN
Basic static load rating (C₀) 7.8 kN
Fatigue load limit (Pu) 0.335 kN
Limiting speed 7000 r/min

Design and execution

Design & execution for F2B 014-TF
Sealing Two contact seals (2RS)
Factory lubricant Grease, relubricatable
Ring & ball material Bearing steel insert, cast iron housing

Identification

Identification for F2B 014-TF
Part number F2B 014-TF
Manufacturer part number F2B 014-TF
Conforms to standard North American (inch)

Interchange and cross-reference

Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.

Interchange designations for F2B 014-TF
Manufacturer Their designation Our equivalent
SKF F2B 014-TF F2B 014-TF

Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.

Questions engineers ask about this bearing

What shaft size is F2B 014-TF for?

7/8 in (22.225 mm).

Does it work with reversing shafts?

Yes. Set screw locking handles constant or alternating rotation.

What protects the bearing?

A flinger and a contact seal on each side.

What is the static load rating?

7.8 kN.

Need a price for F2B 014-TF?

Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.

Request a quotation
F2B 014-TF Price on application
Get a quote

Quote for F2B 014-TF

Quantity and application are enough to start. We will come back with price, lead time and any better-suited designation.

Running speed, load, temperature, how it’s mounted and the part you’re replacing all help us get it right the first time.

We only use your details to reply to this enquiry. See our privacy policy.