F2B 100-TF
1 in oval flange unit with set screw locking, an extended inner ring and flinger seals.
- Bore d
- 25.4 mm
- Width B
- 38.9 mm
- Dynamic C
- 14 kN
- Static C₀
- 7.8 kN
- Limiting speed
- 7,000 r/min
- Ex-stock
- ISO 9001, lot traceable
- Vibration checked per lot
- Certificate with every shipment
Overview
F2B 100-TF is a two-bolt oval flange unit for 1 in (25.4 mm) shafts. It follows North American inch standards and holds a sealed YAR 205-100-2F insert locked with set screws.
A popular everyday choice
The extended 34.1 mm inner ring gives the 1/4-28 UNF set screws a firm hold, and it works whether the shaft turns one way or reverses. A flinger in front of each seal throws off dirt.
Specifications
- Shaft diameter (d): 1 in (25.4 mm)
- Bolt hole centres (J): 98.8 mm
- Overall height (H): 123.8 mm
- Overall length (L): 69.9 mm
- Housing width (A): 29.6 mm
- Overall width (T): 38.9 mm
- Inner ring width (B1): 34.1 mm
- Bolt holes (N): 12.7 mm, for 7/16 in bolts
- Basic dynamic load rating (C): 14 kN
- Basic static load rating (C0): 7.8 kN
- Fatigue load limit (Pu): 0.335 kN
- Limiting speed: 7 000 r/min (h6 shaft)
- Insert bearing: YAR 205-100-2F (extended inner ring, set screw locking)
- Locking: Set screws (1/4-28 UNF)
- Sealing: Contact seal and flinger on both sides
- Housing: cast iron, oval 2-bolt flange, with grease fitting
- Weight: approx. 0.578 kg
How to fit it
- Clean the shaft and check it for burrs.
- Bolt the unit down with two 7/16 in bolts on 98.8 mm centres.
- Align the shaft and tighten the set screws.
- Regrease through the fitting during service.
Where it is used
- Conveyors
- Reversing drives
- Packaging machines
- Material handling
Key features
- Fits 1 in (25.4 mm) shafts
- Set screw locking
- Extended 34.1 mm inner ring
- Seals with flingers
- Takes the ECY 205 end cover
Typical applications
- Conveyors
- Reversing drives
- Packaging machines
- Material handling
Principal dimensions
Boundary dimensions to ISO 15. Tolerances to the precision class stated under Execution.
| Bore diameter (d) | 25.4 mm |
|---|---|
| Width (B) | 38.9 mm |
| Mass | 0.578 kg |
Load ratings and speed
Load ratings determined to ISO 281. Limiting speed assumes correct mounting, adequate lubrication and the clearance class listed.
| Basic dynamic load rating (C) | 14 kN |
|---|---|
| Basic static load rating (C₀) | 7.8 kN |
| Fatigue load limit (Pu) | 0.335 kN |
| Limiting speed | 7000 r/min |
Design and execution
| Sealing | Two contact seals (2RS) |
|---|---|
| Factory lubricant | Grease, relubricatable |
| Ring & ball material | Bearing steel insert, cast iron housing |
Identification
| Part number | F2B 100-TF |
|---|---|
| Manufacturer part number | F2B 100-TF |
| Conforms to standard | North American (inch) |
Interchange and cross-reference
Dimensionally equivalent designations. Equivalence covers boundary dimensions; clearance, cage and sealing may differ, so check the Execution table before substituting.
| Manufacturer | Their designation | Our equivalent |
|---|---|---|
| SKF | F2B 100-TF |
F2B 100-TF |
Third-party designations and trademarks are the property of their respective owners and are quoted for identification only. China Bearing Manufacturer is not affiliated with, nor endorsed by, those manufacturers.
Questions engineers ask about this bearing
What shaft does F2B 100-TF fit?
A 1 in (25.4 mm) shaft.
Can it run in both directions?
Yes. Set screw locking works either way.
How is it different from F2B 100-RM?
It has a wider extended inner ring and flingers in front of the seals.
What end cover fits?
The ECY 205 end cover.
Need a price for F2B 100-TF?
Tell us the quantity and the application. Price, lead time and an engineer’s recommendation, usually within one working day.
